Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , SHOULDERED
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code |
Company |
| 19207 |
U S ARMY TANK AUTOMOTIVE COMMAND AMS |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AMCZ |
FIRST END KEYWAY WIDTH |
0.3735 INCHES MINIMUM AND 0.3755 INCHES MAXIMUM |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| CSYM |
SURFACE FINISH |
40.0 MICROINCHES |
| AMDG |
FIRST END KEYWAY DEPTH |
0.209 INCHES NOMINAL |
| AMFR |
SECOND END KEYWAY WIDTH |
0.3735 INCHES MINIMUM AND 0.3755 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
18.750 INCHES NOMINAL |
| AMFS |
SECOND END EXTERNAL KEYWAY LENGTH |
1.281 INCHES NOMINAL |
| CSPY |
LARGEST STEP DIAMETER |
1.771 INCHES NOMINAL |
| AMDE |
FIRST END EXTERNAL KEYWAY LENGTH |
1.375 INCHES NOMINAL |
| AMFW |
SECOND END DISTANCE FROM KEYWAY CENTER TO END |
14.020 INCHES NOMINAL |
| AAGZ |
FIRST END STYLE |
FLAT KEYWAY |
| ATPC |
STEP QUANTITY |
2 |
| AMHQ |
SECOND END DISTANCE BETWEEN KEYWAY CENTERS |
12.314 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE |
| AMFZ |
SECOND END DIAMETER |
1.7716 INCHES MINIMUM AND 1.7719 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 4140 |
| AAHP |
SECOND END STYLE |
TWO FLAT KEYWAYS |
| AMDL |
FIRST END DIAMETER |
1.4990 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
FIRST END DRILLED,0.453 IN. DIA,1.500 IN. DP,TAP 1/2-20UNC-2B 1.000 IN. DP;SECOND END CIR GROOVED,11.033 IN. GROOVE W,1.750 IN. GROOVE DIA,2.342 IN. DISTANCE FROM END TO GROOVE |
| AMHY |
SECOND END ANGLE BETWEEN KEYWAYS |
360.0 DEGREES NOMINAL |
| AMFT |
SECOND END KEYWAY DEPTH |
0.187 INCHES MINIMUM AND 0.192 INCHES MAXIMUM |
Similar Parts