Part Number
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
CAGE Information
| Code | Company |
|---|---|
| 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMS |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMFR | SECOND END KEYWAY WIDTH | 0.1880 INCHES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | TWO WOODRUFF KEYWAYS AND CROSS DRILLED HOLE |
| AMFW | SECOND END DISTANCE FROM KEYWAY CENTER TO END | 1.000 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 MIL SPEC ALL MATERIAL RESPONSES |
| AMDH | FIRST END DISTANCE FROM KEYWAY CENTER TO END | 1.000 INCHES NOMINAL |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 1.000 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 1.9970 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 11.000 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 1.9970 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | FIRST END PARTIAL BORE 10.250 IN. DP;FIRST END INT THD 0.375 IN. LG |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 1.000 INCHES NOMINAL |
| AMFE | FIRST END ANGLE BETWEEN KEYWAYS | 180.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL COMP 1113 OR STEEL COMP 1116 OR STEEL COMP 1117 |
| AAGZ | FIRST END STYLE | TWO WOODRUFF KEYWAYS AND CROSS DRILLED HOLE |
| AMGS | SECOND END HOLE DIAMETER | 0.1880 INCHES NOMINAL |
| AMDE | FIRST END EXTERNAL KEYWAY LENGTH | 1.250 INCHES NOMINAL |
| AMES | FIRST END DISTANCE BETWEEN KEYWAY CENTERS | ANY ACCEPTABLE |
| AMFS | SECOND END EXTERNAL KEYWAY LENGTH | 1.250 INCHES NOMINAL |
| AMDX | FIRST END HOLE DIAMETER | 0.1250 INCHES NOMINAL |
| AMHY | SECOND END ANGLE BETWEEN KEYWAYS | 180.0 DEGREES NOMINAL |
| AMHQ | SECOND END DISTANCE BETWEEN KEYWAY CENTERS | ANY ACCEPTABLE |
| AMCZ | FIRST END KEYWAY WIDTH | 0.1880 INCHES NOMINAL |