Part Number
Part Number:
NSN:
NIIN:
Item Name:
NUT , SELF-LOCKING , HEXAGON
Definition:
A NUT HAVING A FLAT BOTTOM AND 6 SIDES. AN INTEGRAL FEATURE IS INCORPORATED FOR LOCKING ON THE THREADS OF A MATING MEMBER. EXCLUDES NUT (1), SELF-LOCKING, CAP.
CAGE Information
| Code | Company |
|---|---|
| 019L2 | MAC LEAN-FOGG COMPANY DBA MAC LEAN-E |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSXL | BEARING SURFACE FINISH | 125.0 MICROINCHES |
| MATT | MATERIAL | STEEL CORROSION RESISTING NUT |
| ASDB | WIDTH ACROSS FLATS | 0.336 INCHES MINIMUM AND 0.345 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 88.0 DEGREES MINIMUM NUT |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT |
| CQFM | HARDNESS RATING | NOT RATED |
| MATT | MATERIAL | PLASTIC POLYAMIDE LOCKING INSERT |
| AGAV | END ITEM IDENTIFICATION | W/S:STREAM (STD. TENSIONED REPLENISHMENT AT SEA METHOD); FIRE CONTROL SYSTEM, MISSILE MK74 (FCS); SUPPORT EQUIPMENT, B-1 AIRCRAFT; GUIDED MISSILE LAUNCHING SYSTEM, MK 26 (GMLS); AIRBORNE MOBILE DIR AIR SPT CTL (2ID), (02M JUL83)(AN/UYQ-3A); SUPPORT EQUIPMENT, B-52 AIRCRAFT; RADAR SET, AN/TPN-18; AIRCRAFT, SOF (AC-130H, MC-130H, EC-130E, HC-130); COMMUNICATIONS TERMINAL, SATELLITE AN/GSC-39(V)1 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| SFTT | SURFACE TREATMENT | PASSIVATE NUT |
| ADEA | NUT HEIGHT | 0.188 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3B |
| ABAJ | LUBRICATION | SOLUBLE LUBRICANT |
| ACTA | NUT STYLE | HEXAGON |
| BZRR | THREAD SERIES | UNJC |
| CRTM | BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED |
| CQJX | NOMINAL THREAD SIZE | 0.164 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AZKQ | TEMP RATING | 250.0 DEG FAHRENHEIT MAXIMUM |