Part Number
Part Number:
NSN:
NIIN:
Item Name:
MOTOR , CONTROL
Definition:
A MOTOR WHICH IS DESIGNED TO BE OPERATED FROM TWO INDEPENDENT VOLTAGE SOURCES, IN SUCH A WAY THAT VARIATIONS IN ONE VOLTAGE SOURCE WILL DETERMINE THE DIRECTION AND SPEED OF THE MOTOR. IN THE ALTERNATING CURRENT TYPE THE VOLTAGES ARE USUALLY APPLIED TO A SPLIT-PHASE STATOR, WHEREAS IN THE DIRECT CURRENT TYPE, ONE VOLTAGE IS APPLIED TO THE STATOR AND THE OTHER TO THE ARMATURE. LOW INERTIA AND RAPID REVERSIBILITY ARE INHERENT CHARACTERISTICS OF THIS TYPE OF MOTOR. SEE ALSO SERVOMOTOR, AUTOMATIC PILOT.
CAGE Information
| Code | Company |
|---|---|
| 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL D |
Federal Supply Class
Title
MOTORS, ELECTRICAL
Inclusions:
Exclusions:
EXCLUDES STARTING MOTORS FOR ENGINES.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ACDC | CURRENT TYPE | AC INPUT |
| BFMK | CONTROL FIELD IMPEDANCE RATING IN OHMS | 6500.0 |
| AAJV | OVERALL WIDTH | 1.700 INCHES |
| CWHZ | SHAFT END CHARACTERISTIC | A14 SINGLE STYLE SINGLE END |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| ANPZ | INCLOSURE FEATURE | TOTALLY INCLOSED |
| BFML | CONTROL FIELD WINDING TYPE | SINGLE WINDING W/CENTER TAP |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| AAJT | OVERALL HEIGHT | 1.700 INCHES |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 1 CLAMP COLLAR |
| BFMF | COOLING METHOD | AMBIENT AIR |
| FREQ | FREQUENCY IN HERTZ | 60.0 INPUT |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SOLDER LUG |
| ABWV | SHAFT DIAMETER | 0.155 INCHES MINIMUM SINGLE END AND 0.156 INCHES MAXIMUM SINGLE END |
| BKPS | CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | 230.0 AC |
| AXFH | SPLINE LENGTH | 0.3300 INCHES NOMINAL SINGLE END |
| AAJU | OVERALL LENGTH | 2.775 INCHES |
| CWFX | ROTOR SPEED RATING IN RPM | 3300.0 SINGLE NO LOAD |
| AXGY | MOUNTING METHOD | CLAMP RING |
| AAUH | SPLINE MINOR DIAMETER | 0.134 INCHES MINIMUM SINGLE END AND 0.135 INCHES MAXIMUM SINGLE END |
| ABSA | SPLINE QUANTITY | 13 SINGLE END |
| FAAZ | PHASE | TWO INPUT |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 0.505 INCHES SINGLE END |
| BKPH | TORQUE RATING AND TYPE | 3.0 INCH-OUNCES STALLED |