Part Number
Part Number:
NSN:
NIIN:
Item Name:
NONMETALLIC CHANNEL
Definition:
A STRUCTURAL SHAPE FABRICATED FROM NONMETALLIC MATERIAL(S) HAVING TWO VERTICAL FLANGES THAT EXTEND IN THE SAME DIRECTION FROM EACH END OF A HORIZONTAL BASE. THE VERTICAL FLANGES MAY HAVE VARIOUS TYPE TIPS AND ADDITIONAL FLANGES WHICH EXTEND ON THE SAME PLANE AS THE BASE. IT MAY HAVE A REINFORCING AGENT(S) AND BACKING EXCLUDES SEAL, NONMETALLIC CHANNEL.
CAGE Information
| Code | Company |
|---|---|
| 19204 | ARMY UNITED STATES DEPARTMENT OF THE |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADXK | RIGHT SIDE FLANGE HEIGHT | 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| ADXK | RIGHT SIDE FLANGE HEIGHT | 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| AJGP | BASE FLANGE THICKNESS | 0.062 INCHES NOMINAL |
| AASH | MINIMUM TENSILE STRENGTH | 1500 POUNDS PER SQUARE INCH |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | II TYPE |
| ABMK | OVERALL WIDTH | 0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| ADZC | ENVIRONMENTAL PROTECTION | OIL RESISTANT |
| MATT | MATERIAL | RUBBER |
| ADXL | LEFT SIDE FLANGE THICKNESS | 0.031 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-7362, TYPE 2 MIL SPEC SINGLE MATERIAL RESPONSE |
| AASF | NONMETALLIC HARDNESS RATING | 65.0 MINIMUM SHORE DUROMETER A AND 75.0 MAXIMUM SHORE DUROMETER A |
| BHQU | LEFT-SIDE FLANGE TIP STYLE | LEFT SQUARE END |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | OPEN CHANNEL |
| ADXM | RIGHT SIDE FLANGE THICKNESS | 0.031 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |
| CZLZ | RIGHT-SIDE FLANGE TIP STYLE | RIGHT SQUARE END |
| ABKW | OVERALL HEIGHT | 0.281 INCHES MINIMUM AND 0.344 INCHES MAXIMUM |
| ABRY | LENGTH | 4.500 INCHES MINIMUM AND 4.750 INCHES MAXIMUM |