Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT ASSEMBLY , FLEXIBLE
Definition:
AN ITEM CONSISTING OF A CASING WITH FITTINGS AND ATTACHMENTS ON EACH END AND A SPIRALLY WOUND WIRE CORE WITH FORMED END(S) AND/OR CRIMPED ON END FITTINGS. IT IS DESIGNED TO TRANSMIT ROTARY MOTION AROUND BENDS FROM A MOTOR OR OTHER POWER SOURCE TO DRIVE VARIOUS TYPES OF EQUIPMENT, SUCH AS TACHOMETERS, SPEEDOMETERS, REMOTE CONTROLS, INSTRUMENTS, AND THE LIKE, WHICH ARE LOCATED AT AN ANGLE AND/OR DISTANCE FROM THE POWER SOURCE. SEE ALSO CONTROL ASSEMBLY, PUSH-PULL.
CAGE Information
| Code | Company |
|---|---|
| 24446 | GENERAL ELECTRIC CO |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AXYS | SPLINE TYPE | INVOLUTE BOTH ENDS |
| ABHP | OVERALL LENGTH | 25.250 INCHES NOMINAL |
| CFRP | CASING LENGTH BETWEEN FERRULES | 21.880 INCHES NOMINAL |
| AASA | THREAD LENGTH | 0.563 INCHES NOMINAL BOTH ENDS |
| CFRR | CASING PROTECTIVE DEVICE TYPE | RUBBER COVER |
| AWZY | END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS |
| ABUJ | THREAD SIZE (NON-CORE) | ERR-070 |
| CFRW | END OVERALL DIAMETER | 1.000 INCHES NOMINAL BOTH ENDS |
| AXFH | SPLINE LENGTH | 0.437 INCHES NOMINAL BOTH ENDS |
| ABSC | SPLINE MINOR DIAMETER | 0.239 INCHES NOMINAL BOTH ENDS |
| ABSA | SPLINE QUANTITY | 12 BOTH ENDS |
| AGJS | PITCH DIAMETER | 0.250 INCHES NOMINAL BOTH ENDS |
| AKMF | CORE SURFACE TREATMENT | FINISH PER SPEC NO. MIL-F-14072 |
| AAJD | THREAD CLASS | 3A BOTH ENDS |
| AJXJ | CORE MATERIAL | STEEL |
| CFRZ | CORE OVERALL LENGTH | 25.250 INCHES NOMINAL |
| AAUJ | SPLINE MAJOR DIAMETER | 0.271 INCHES NOMINAL BOTH ENDS |
| CFRQ | CASING OUTSIDE DIAMETER | 0.406 INCHES NOMINAL |
| BJPS | CASING MATERIAL | STEEL, SPRING |
| AEDN | TIP LENGTH | 1.750 INCHES NOMINAL BOTH ENDS |
| CFSM | STRENGTH RATING CHARACTERISTICS (NON-CORE) | 17.0 POUNDS TORSION STRENGTH UNWINDING DIRECTION |
| APJC | THREAD LOCATION | EXTERNAL BOTH ENDS |
| CFRT | SWIVEL END | NOT PROVIDED BOTH ENDS |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 14.5 BOTH ENDS |
| CFSL | CORE REMOVABILITY | NONREMOVABLE |
| CFRN | CASING SURFACE TREATMENT | FINISH PER SPEC NO. MIL-F-14072 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNF BOTH ENDS |
| ZZZV | FSC APPLICATION DATA | RADAR SET,NONAIRBORNE,EXCEPT FIRE CONTROL AND GUIDED MISSILE |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.500 INCHES CLEANING WIRE ANY ACCEPTABLE BOTH ENDS |
| CGDN | MINIMUM OPERATING RADIUS | 3.500 INCHES |
| AAJF | THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
| BDRL | SETSCREW | NOT INCLUDED BOTH ENDS |
| CFRY | LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| CFRM | TORSIONAL DEFLECTION RATING | 6 DEG FT LB IN. TORSIONAL DEFLECTION RATING FOR WINDING AND UNWINDING |
| APTD | END TYPE | ROUND, INTERNAL SPLINED BOTH ENDS |
| AKMH | CORE DIAMETER | 0.150 INCHES NOMINAL |