Part Number
Part Number:
NSN:
NIIN:
Item Name:
RESISTOR , FIXED , WIRE WOUND , INDUCT
Definition:
INC 37403 REINSTATED ON 010303~A RESISTOR WHOSE OHMIC VALUE CANNOT BE ADJUSTED OR VARIED. THE RESISTANCE ELEMENT CONSISTS OF HIGH RESISTANCE WIRE (OR RIBBON) EITHER WOUND ON AN INSULATED FORM OR CONSTRUCTED SO AS TO BE SELF-SUPPORTING. THE ITEM MUST HAVE INHERENT CHARACTERISTICS OF INDUCING SELF-INDUCTANCE. OPPOSITION TO CURRENT FLOW IS AN INHERENT PROPERTY OF THE RESISTANCE WIRE AND IS MANIFESTED BY THE HEAT DISSIPATION IN THE RESISTOR. EXCLUDES SUPPRESSOR, IGNITION INTERFERENCE. SEE ALSO RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.
CAGE Information
| Code | Company |
|---|---|
| 14193 | CAL-R INC |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADAQ | BODY LENGTH | 0.600 INCHES NOMINAL |
| AFWW | TERMINAL WIDTH | 0.140 INCHES MINIMUM |
| BYML | MOUNTING HOLE SIZE | 0.093 INCHES NOMINAL |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -100.0/+100.0 |
| ADAU | BODY HEIGHT | 0.320 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | AXIAL TERMINAL (S) |
| AAQZ | INCLOSURE METHOD | ENCASED |
| AAQF | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 |
| PKWT | UNPACKAGED UNIT WEIGHT | 13.0 GRAMS |
| ABJT | TERMINAL LENGTH | 0.262 INCHES NOMINAL |
| AAPP | ELECTRICAL RESISTANCE | 0.0196 OHMS |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0/+275.0 |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -1.000/+1.000 |
| CBME | CUBIC MEASURE (NON-CORE) | 0.047 CUBIC INCHES |
| AEFB | POWER DISSIPATION RATING IN WATTS | 10.000 FREE AIR |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| ADAT | BODY WIDTH | 0.334 INCHES NOMINAL |
| AARB | TERMINAL TYPE | TAB, SOLDER LUG |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 0.444 INCHES NOMINAL |