Part Number
Part Number:
NSN:
NIIN:
Item Name:
WASHER , LOCK
Definition:
A WASHER WHICH IS USUALLY ROUND WITH A CENTRALLY LOCATED HOLE. ITS EDGES AND TWO BEARING SURFACES ARE SO DESIGNED THAT APPLIED PRESSURE BRINGS INTO PLAY THE SPRING TENSION AND/OR FRICTIONAL LOCKING PRINCIPLE WHICH MATERIALLY RESISTS ANY TENDENCY TOWARD TURNING. IT MAY BE MADE OF ONE OR TWO PIECES
CAGE Information
| Code | Company |
|---|---|
| D9182 | BOSCH REXROTH GMBH LOHMANN STOLTERFO |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABKV | OUTSIDE DIAMETER | 0.594 INCHES MINIMUM AND 0.610 INCHES MAXIMUM |
| ABKV | OUTSIDE DIAMETER | 0.594 INCHES MINIMUM AND 0.610 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.320 INCHES MINIMUM AND 0.332 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM |
| STYL | STYLE DESIGNATOR | FLAT INTERNAL TEETH |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL |
| CQFM | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER, LOCK, FLAT, INTERNAL TOOTH |
| MATT | MATERIAL | STEEL COMP 1561 OVERALL OR STEEL COMP 1060 OVERALL OR STEEL COMP 1551 OVERALL OR STEEL COMP 1059 OVERALL OR STEEL COMP 1050 OVERALL OR STEEL COMP 1064 OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |