Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 93234 | WORTHINGTON COMPRESSORS INC AIR POWE |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| FEAT | SPECIAL FEATURES | HOLLOW SHAFT,1.312 IN. BORE DIA; 2ND END KEYWAY IS 180 DEG FROM CROSS DRILLED HOLE |
| AMDX | FIRST END HOLE DIAMETER | 0.4375 INCHES NOMINAL |
| AMFW | SECOND END DISTANCE FROM KEYWAY CENTER TO END | 0.625 INCHES NOMINAL |
| AAHP | SECOND END STYLE | WOODRUFF KEYWAY AND CROSS DRILLED |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.500 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 2.312 INCHES NOMINAL |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.500 INCHES NOMINAL |
| MATT | MATERIAL | STEEL |
| AMDL | FIRST END DIAMETER | 2.1870 INCHES NOMINAL |
| AMFS | SECOND END EXTERNAL KEYWAY LENGTH | 0.625 INCHES NOMINAL |
| AMHD | SECOND END HOLE DEPTH | 0.437 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 2.3125 INCHES NOMINAL |
| AMGS | SECOND END HOLE DIAMETER | 0.4375 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 3 |
| AMFR | SECOND END KEYWAY WIDTH | 0.1875 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | UNTHREADED CROSS DRILLED |
| ABHP | OVERALL LENGTH | 4.750 INCHES NOMINAL |
| AMEB | FIRST END HOLE DEPTH | 0.437 INCHES NOMINAL |