Part Number
Part Number:
NSN:
NIIN:
Item Name:
RESISTOR , FIXED , WIRE WOUND , INDUCT
Definition:
INC 37403 REINSTATED ON 010303~A RESISTOR WHOSE OHMIC VALUE CANNOT BE ADJUSTED OR VARIED. THE RESISTANCE ELEMENT CONSISTS OF HIGH RESISTANCE WIRE (OR RIBBON) EITHER WOUND ON AN INSULATED FORM OR CONSTRUCTED SO AS TO BE SELF-SUPPORTING. THE ITEM MUST HAVE INHERENT CHARACTERISTICS OF INDUCING SELF-INDUCTANCE. OPPOSITION TO CURRENT FLOW IS AN INHERENT PROPERTY OF THE RESISTANCE WIRE AND IS MANIFESTED BY THE HEAT DISSIPATION IN THE RESISTOR. EXCLUDES SUPPRESSOR, IGNITION INTERFERENCE. SEE ALSO RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.
CAGE Information
| Code | Company |
|---|---|
| 12697 | CLAROSTAT SENSORS AND CONTROLS |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAQF | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 40.0 |
| ADAQ | BODY LENGTH | 8.495 INCHES MINIMUM AND 8.505 INCHES MAXIMUM |
| ABJT | TERMINAL LENGTH | 0.683 INCHES MINIMUM AND 0.693 INCHES MAXIMUM |
| AEFB | POWER DISSIPATION RATING IN WATTS | 400.000 FREE AIR |
| AAQZ | INCLOSURE METHOD | ENCAPSULATED |
| FEAT | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE ELECTRONICS SUPPLY CENTER PRODUCTION STANDARD NO. L04055; FOR NAVY NUCLEAR PROPULSION PLANT PRODUCTS ONLY |
| ABPM | BODY DIAMETER | 1.620 INCHES MINIMUM AND 1.630 INCHES MAXIMUM |
| TEST | TEST DATA DOCUMENT | 14933-L04055 DRAWING |
| STYL | STYLE DESIGNATOR | RADIAL TERMINAL EACH END |
| AFWW | TERMINAL WIDTH | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| PKWT | UNPACKAGED UNIT WEIGHT | 200.0 GRAMS |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -10.000/+10.000 |
| AAPP | ELECTRICAL RESISTANCE | 32.000 OHMS |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 415.0 |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| AGAV | END ITEM IDENTIFICATION | UNIT TEST DEV |
| CBME | CUBIC MEASURE (NON-CORE) | 17.629 CUBIC INCHES |
| AARB | TERMINAL TYPE | TAB, SOLDER LUG |