Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 18876 | U S ARMY AVIATION AND MISSILE COMMAN |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADAP | MOUNTING BUSHING LENGTH | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM |
| AAPN | SECTION QUANTITY | 1 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| ABPM | BODY DIAMETER | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| AEFP | NONTURN DEVICE RADIUS | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| APXH | TERMINAL LOCATION | REAR END |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ABHP | OVERALL LENGTH | 1.313 INCHES MAXIMUM |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| ABWV | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 100.0 OHMS SINGLE SECTION |
| AXGY | MOUNTING METHOD | LOCKING BUSHING |
| ADAQ | BODY LENGTH | 0.453 INCHES MAXIMUM |