Part Number
Part Number:
NSN:
NIIN:
Item Name:
TERMINAL BOARD
Definition:
AN ITEM CONSISTING OF INSULATING MATERIAL, WHICH IS SPECIFICALLY DESIGNED TO HAVE FASTENED THEREON, OR ON WHICH ARE FASTENED TERMINAL(S), SUCH AS SCREWS, SOLDER LUGS, SOLDER STUDS, SOLDERLESS CONNECTORS, CLIPS, AND THE LIKE. IT IS USUALLY USED FOR JUNCTIONS OR TERMINATIONS OF WIRE OR CABLE ASSEMBLIES. IT DOES NOT INCLUDE ITEMS AS DEFINED ABOVE WITH PARTS, SUCH AS RESISTORS AND CAPACITORS MOUNTED THEREON. DO NOT USE IF A MORE SPECIFIC NAME EXISTS, SUCH AS FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (AS MODIFIED); CONNECTOR (AS MODIFIED). EXCLUDES TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; AND CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. FOR ITEMS HAVING PRINTED ELECTRICAL CONDUCTOR PATHS, SEE PRINTED WIRING BOARD.
CAGE Information
| Code |
Company |
| 18876 |
U S ARMY AVIATION AND MISSILE COMMAN |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| ABCX |
BOARD CONSTRUCTION |
SOLID CONSTRUCTION |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
4 UNTHREADED HOLE |
| MATT |
MATERIAL |
PLASTIC PHENOLIC BOARD AND PAPER BOARD |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
L-P-513,TYPE PBE FED SPEC SINGLE MATERIAL RESPONSE BOARD |
| ABGT |
BOARD THICKNESS |
0.064 INCHES |
| ABGP |
BOARD OVERALL WIDTH |
2.240 INCHES |
| ABCU |
DISTANCE BETWEEN TERMINAL ROW CENTERS |
0.270 INCHES |
| AAMA |
MOUNTING HOLE DIAMETER |
0.137 INCHES |
| ABGN |
BOARD OVERALL LENGTH |
3.400 INCHES |
| AAQL |
BODY STYLE |
STRIP TYPE |
| CWLN |
TERMINAL DESIGN |
NONFEEDTHRU |
| ABCS |
TERMINAL ROW QUANTITY |
7 |
| CWLG |
TERMINAL PATTERN ARRANGEMENT |
MULTI-ROW STAGGERED |
| SFTT |
SURFACE TREATMENT |
COPPER TERMINALS AND TIN TERMINALS |
| CRNL |
NONFEEDTHRU TERMINAL TYPE |
462 SINGLE |
| ABCT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.260 INCHES |
| ABDX |
DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY |
0.600 INCHES |
| CSCS |
NONFEEDTHRU TERMINAL QUANTITY |
16 SINGLE |
| ABDW |
DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE |
0.272 INCHES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-14550 MIL SPEC 1ST TREATMENT RESPONSE TERMINALS AND MIL-T-10727,TYPE 1 MIL SPEC 2ND TREATMENT RESPONSE TERMINALS |
| ABDU |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
2.600 INCHES |
| ABDV |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH |
1.688 INCHES |
Similar Parts