Part Number
Part Number:
NSN:
NIIN:
Item Name:
TERMINAL BOARD
Definition:
AN ITEM CONSISTING OF INSULATING MATERIAL, WHICH IS SPECIFICALLY DESIGNED TO HAVE FASTENED THEREON, OR ON WHICH ARE FASTENED TERMINAL(S), SUCH AS SCREWS, SOLDER LUGS, SOLDER STUDS, SOLDERLESS CONNECTORS, CLIPS, AND THE LIKE. IT IS USUALLY USED FOR JUNCTIONS OR TERMINATIONS OF WIRE OR CABLE ASSEMBLIES. IT DOES NOT INCLUDE ITEMS AS DEFINED ABOVE WITH PARTS, SUCH AS RESISTORS AND CAPACITORS MOUNTED THEREON. DO NOT USE IF A MORE SPECIFIC NAME EXISTS, SUCH AS FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (AS MODIFIED); CONNECTOR (AS MODIFIED). EXCLUDES TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; AND CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. FOR ITEMS HAVING PRINTED ELECTRICAL CONDUCTOR PATHS, SEE PRINTED WIRING BOARD.
CAGE Information
| Code |
Company |
| 18876 |
U S ARMY AVIATION AND MISSILE COMMAN |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| ABCX |
BOARD CONSTRUCTION |
SOLID CONSTRUCTION |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
4 UNTHREADED HOLE |
| CQCW |
FEEDTHRU CONNECTION END TYPE |
434 BOTH ENDS SINGLE COMBINATION |
| CRZR |
FEEDTHRU TERMINAL QUANTITY |
56 SINGLE COMBINATION |
| MATT |
MATERIAL |
GLASS BOARD |
| ABDX |
DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY |
0.250 INCHES |
| AAQL |
BODY STYLE |
STRIP TYPE |
| CWLG |
TERMINAL PATTERN ARRANGEMENT |
RANDOM |
| ABDU |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
6.375 INCHES |
| ABGN |
BOARD OVERALL LENGTH |
6.875 INCHES |
| ABDV |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH |
2.125 INCHES |
| AAMA |
MOUNTING HOLE DIAMETER |
0.200 INCHES |
| ABGT |
BOARD THICKNESS |
0.125 INCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-P-997 MIL SPEC SINGLE MATERIAL RESPONSE BOARD |
| ABDW |
DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE |
0.500 INCHES |
| ABGP |
BOARD OVERALL WIDTH |
3.125 INCHES |
| CWLN |
TERMINAL DESIGN |
FEEDTHRU |
| MARK |
SPECIAL MARKINGS |
C2 THRU C6,C15,CR1,CR2,Q1 THRU Q4,R6 THRU R24 |
Similar Parts