Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 73138 | BI TECHNOLOGIES CORPORATION |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 190.0 NOMINAL |
| AAPN | SECTION QUANTITY | 1 |
| CBME | CUBIC MEASURE | 0.023 CUBIC INCHES |
| ADAV | OVERALL DIAMETER | 0.385 INCHES MAXIMUM |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AEFK | MAXIMUM STARTING TORQUE | 6.00 INCH-OUNCES |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| AXGY | MOUNTING METHOD | TERMINAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.000 OHMS C AND BETTER FLOORING |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0/+20.0 SINGLE SECTION |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 216.0 NOMINAL |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| AEFD | ACTUATOR TYPE | FLUSH DRIVE WITH SLOT-HOLE |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPM | BODY DIAMETER | 0.385 NOMINAL CENTIMETERS |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 NOMINAL INCHES |
| AAQL | BODY STYLE | CYLINDRICAL |
| AEFM | MAXIMUM STOP TORQUE | 12.00 INCH-OUNCES |
| ADAQ | BODY LENGTH | 0.200 INCHES NOMINAL |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| ABJT | TERMINAL LENGTH | 0.180 INCHES MINIMUM |
| ABHP | OVERALL LENGTH | 0.380 INCHES NOMINAL |
| APXH | TERMINAL LOCATION | REAR END |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 7TH SECONDARY QUALITY |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| AEFL | MAXIMUM RUNNING TORQUE | 6.00 INCH-OUNCES |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0/+100.0 SINGLE SECTION |