Part Number
Part Number:
NSN:
NIIN:
Item Name:
PIN , SHOULDER , HEADLESS
Definition:
A CYLINDRICALLY-SHAPED HEADLESS ITEM, HAVING A SHANK AT ONE OR BOTH ENDS. IT IS USED FOR ALIGNING, FASTENING, OR TRANSFER OF TORQUE AND/OR THRUST BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE THREADED ON ONE END.
CAGE Information
| Code | Company |
|---|---|
| 01365 | MARINE CORPS LOGISTICS COMMAND TECHN |
Federal Supply Class
Title
NAILS, MACHINE KEYS, AND PINS
Inclusions:
INCLUDES DOWEL PINS, SPLIT PINS; SPIKES; TACKS; NONOFFICE TYPE STAPLES; MACHINE KEYS; BRADS; SHOULDERED PINS; COTTER PINS; NAILS.
Exclusions:
EXCLUDES SHAFTS (FSC 3040); LOCK KEYS (FSC 5340).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AATR | SHANK LENGTH | 0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| AAZE | SHANK DIAMETER | 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| ABHP | OVERALL LENGTH | 0.720 INCHES MINIMUM AND 0.730 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| AAHP | SECOND END STYLE | RADIUS |
| AMCS | FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5630,CLASS440C ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | SHOULDER |
| AAVH | SHOULDER DIAMETER | 0.188 INCHES NOMINAL |
| ALWS | SECOND END CORNER RADIUS | 0.005 INCHES MAXIMUM |
| CQFM | HARDNESS RATING | 56.0 ROCKWELL C NOMINAL OVERALL |
| CRDY | FIRST END LOCATION | CHAMFERED END |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| FEAT | SPECIAL FEATURES | END ITEM LIGHT ARMORED VEHICLE;CHAMFER WIDTH0.030 NOMINALLY;HEAT TREATMENT PER MIL-H-6875,QUENCH AND TEMPER AT A MAX TEMP OF 450 DEGREES F FOR A MINIMUM OF 56 ROCKWELL C;UNLESS OTHERWISE SPECIFIED,THE RELATIONSHIP BETWEEN ANY TWO COAXIAL CIRCULAR FEATURES SHALL BE CONTROLLED BY A CIRCULAR RUNOUT TOLERANCE EQUAL TO THE SUM OF THE SIZE TOLERANCES FOR THE FEATURES |
| AAGZ | FIRST END STYLE | CHAMFERED |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171,5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |