Part Number
Part Number:
NSN:
NIIN:
Item Name:
STUD , PLAIN
Definition:
A HEADLESS FASTENER NOT EXCEEDING 12 INCHES (304.8 MM) IN LENGTH, THREADED EXTERNALLY ON BOTH ENDS WITH THREADS OF THE SAME NOMINAL DIAMETER. THE MAXIMUM DIAMETER OF THE UNTHREADED PORTION MUST NOT BE GREATER THAN THE NOMINAL THREAD DIAMETER PLUS 0.020 INCHES (0.508 MM). THE UNTHREADED PORTION MUST BE WITHOUT LOCKING OR WRENCHING PROVISIONS. IT MAY BE THREAD RELIEVED. SEE ALSO ROD, THREADED END AND ROD, CONTINUOUS THREAD.
CAGE Information
| Code | Company |
|---|---|
| 01365 | MARINE CORPS LOGISTICS COMMAND TECHN |
Federal Supply Class
Title
STUDS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 11 STUD THREAD |
| SFTT | SURFACE TREATMENT | PHOSPHATE ZINC OVERALL |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | STUD,DOUBLE END,.625-11 UNC |
| MATT | MATERIAL | STEEL COMP 1213 |
| AAJD | THREAD CLASS | 2A NUT THREAD |
| AAJE | THREAD PITCH DIAMETERS | +0.5689/+0.5720 INCHES STUD THREAD |
| CMLP | THREAD QUANTITY PER INCH | 11 NUT THREAD |
| SUPP | SUPPLEMENTARY FEATURES | TAP END CHAMFERED; NUT END FLAT AND CHAMFERED OR OVAL; TAP END TO HAVE THREAD SEALANT, LOCTITE NO. 513 PRE-APPLIED (NO SEALANT ON FIRST 1-2 THREADS) |
| AAJF | THREAD DIRECTION | RIGHT-HAND NUT THREAD |
| ABHP | OVERALL LENGTH | 2.750 INCHES NOMINAL |
| CRTL | CRITICALITY CODE JUSTIFICATION | AAJE |
| AAJD | THREAD CLASS | 5A STUD THREAD |
| AASA | THREAD LENGTH | 0.628 INCHES MINIMUM STUD THREAD AND 0.688 INCHES MAXIMUM STUD THREAD |
| AASA | THREAD LENGTH | 1.120 INCHES MINIMUM NUT THREAD AND 1.240 INCHES MAXIMUM NUT THREAD |
| THSD | THREAD SERIES DESIGNATOR | UNC STUD THREAD |
| AAJE | THREAD PITCH DIAMETERS | +0.5589/+0.5644 INCHES NUT THREAD |
| AAJF | THREAD DIRECTION | RIGHT-HAND STUD THREAD |
| CQJX | NOMINAL THREAD SIZE | 0.625 INCHES NUT THREAD |
| AGAV | END ITEM IDENTIFICATION | USED ON 93016C4100; END ITEM IS FUEL PUMP, 600 GPM (FU604G) 4930-01-392-7579 |
| THSD | THREAD SERIES DESIGNATOR | UNC NUT THREAD |
| CQJX | NOMINAL THREAD SIZE | 0.625 INCHES STUD THREAD |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM B633 TYPE IV, SC1 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 1113 CRS, OR EQUAL ASSN STD SINGLE MATERIAL RESPONSE |