Part Number
Definition:
A NUT, CIRCULAR IN SHAPE, WHICH MAY HAVE WRENCHING FACILITIES SUCH AS FLATS, HOLES, PROTRUSIONS, SLOTS OR SPLINES IN OR ON THE PERIPHERY OR IN THE FACE OPPOSITE THE BEARING SURFACE. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE OUTSIDE DIAMETER, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. SEE ALSO NUT (1), PLAIN, KNURLED. (WHEN HEIGHT OR THICKNESS AND/OR OUTSIDE DIAMETER IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
CAGE Information
| Code | Company |
|---|---|
| 07482 | GENERAL ELECTRIC COMPANY DBA GE DIV |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQJX | NOMINAL THREAD SIZE | 1.125 INCHES |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| ADBM | DRIVE POINT QUANTITY | 12 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6415 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CQFM | HARDNESS RATING | NOT RATED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAJD | THREAD CLASS | 3B |
| AZKQ | TEMP RATING | NOT RATED |
| BZRR | THREAD SERIES | UNJ |
| ABQU | DRIVE POINT DEPTH | 0.070 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.440 INCHES MINIMUM AND 0.460 INCHES MAXIMUM |
| ACTD | NUT DIAMETER | 1.600 INCHES MINIMUM AND 1.620 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| ACTA | NUT STYLE | ROUND |
| ABPH | SMALL END DIAMETER | 1.420 INCHES MINIMUM AND 1.460 INCHES MAXIMUM |
| ADBH | DRIVE POINT WIDTH | 0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| ADBG | NUT THICKNESS | 0.530 INCHES MINIMUM AND 0.560 INCHES MAXIMUM |
| ADBJ | UNDERCUT THICKNESS | 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |