Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code | Company |
|---|---|
| 56878 | SPS TECHNOLOGIES LLC DBA AEROSPACE D |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS -QQ-P-35 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| AAUR | GRIP DIAMETER | 0.436 INCHES MINIMUM AND 0.437 INCHES MAXIMUM |
| CQBC | MINIMUM TENSILE STRENGTH | 28340 POUNDS PER SQUARE INCH |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| AGAV | END ITEM IDENTIFICATION | FIGHTER AIRCRAFT (F18 E/F); ARR LIST CODE |
| AAJD | THREAD CLASS | 3A |
| AASK | HEAD STYLE | SPLINE EXTENDED WASHER |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | INAVY: BOLT, MACHINE; DWG: BOLT - CLOSE TOLERANCE, SPLINE DRIVE, FLANGE HEAD (145 KSI FSU) CRES |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AATC | EXTENDED WASHER DIAMETER | 0.812 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | M+35 PER ASM 5758 OR AMS 5844 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| FEAT | SPECIAL FEATURES | NON-DRILLED SHANK; WRENCHING ELEMENT NO. 16 |
| ANEE | GRIP LENGTH | 1.625 INCHES NOMINAL |
| AASU | HEAD HEIGHT | 0.393 INCHES NOMINAL |
| AHYM | NOMINAL THREAD DIAMETER | 0.438 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| AASA | THREAD LENGTH | 0.705 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 2.330 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AAZH | HEAD MINOR DIAMETER | 0.500 INCHES NOMINAL |
| AATD | EXTENDED WASHER THICKNESS | 0.063 INCHES NOMINAL |