Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , METALLIC
Definition:
A LENGTH OF METALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, METALLIC. EXCLUDES CONDUIT, ELECTRICAL; CONDUIT ASSEMBLY, ELECTRICAL; CASING, FLEXIBLE CONTROL; AND CASING, FLEXIBLE SHAFT ASSEMBLY.
CAGE Information
| Code | Company |
|---|---|
| 07482 | GENERAL ELECTRIC COMPANY DBA GE DIV |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL TUBE 2ND END |
| CRFY | FLOW ANGLE | 84.0 DEGREES 2ND END |
| CQGM | MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| THSD | THREAD SERIES DESIGNATOR | UNF 2ND END |
| ZZZV | FSC APPLICATION DATA | GAS TURBINES AND JET ENGINES,AIRCRAFT,AND COMPONENTS |
| ADLG | FIRST END FITTING SPEC/STD DATA | GEB50T1182 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| THSD | THREAD SERIES DESIGNATOR | UNJF 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END |
| CRDW | HYDROSTATIC TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED ALUMINUM ALLOY WIRE ERR-100 |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| ADLH | SECOND END FITTING SPEC/STD DATA | GEB50T1182 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AAJD | THREAD CLASS | 3B 1ST END |
| AHNC | CONNECTION STYLE | FLARED 2ND END |
| ABKV | OUTSIDE DIAMETER | 0.375 INCHES NOMINAL |
| AAJD | THREAD CLASS | 3A 2ND END |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | SOCKET STEEL, FED STD 66, AISI 321/SAE 30321 |
| ADJM | INNER CONVEYING TUBE MATERIAL | STEEL |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AARX | INSIDE DIAMETER | 0.305 INCHES NOMINAL |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 90.0 |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES 2ND END |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | NUT STEEL, FED STD 66, AISI 304/SAE 30304 |
| CRXX | MEASURING METHOD AND LENGTH | 11.584 INCHES NOMINAL EXCLUDING END FITTINGS |
| ADLF | HOSE OR TUBING SPEC/STD DATA | GEB50R142 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| ABJH | TEMP RATING | 500.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ADJL | INNER CONVEYING TUBE STYLE | HELICAL OPEN-PITCH CORRUGATED |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| CQHW | FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | NUT CADMIUM |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED STEEL WIRE ERR-100 |
| CQJX | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |