Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 07482 | GENERAL ELECTRIC COMPANY DBA GE DIV |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMDL | FIRST END DIAMETER | 0.3750 INCHES NOMINAL |
| AAHP | SECOND END STYLE | UNTHREADED CROSS DRILLED |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.7200 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | 4920-01-210-6697 |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.2950 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 3.920 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.4945 INCHES NOMINAL |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| FEAT | SPECIAL FEATURES | SHAFT HAS 16 STRAIGHT SPLINES,0.680 IN.FROM 2ND END,2.700 IN.LG,0.675 IN.MAJ DIA |
| CSPY | LARGEST STEP DIAMETER | 0.675 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 3 |
| AMGS | SECOND END HOLE DIAMETER | 0.1560 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | UNTHREADED CROSS DRILLED |
| AMDX | FIRST END HOLE DIAMETER | 0.1560 INCHES NOMINAL |