Part Number
Definition:
A NUT, CIRCULAR IN SHAPE, WHICH MAY HAVE WRENCHING FACILITIES SUCH AS FLATS, HOLES, PROTRUSIONS, SLOTS OR SPLINES IN OR ON THE PERIPHERY OR IN THE FACE OPPOSITE THE BEARING SURFACE. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE OUTSIDE DIAMETER, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. SEE ALSO NUT (1), PLAIN, KNURLED. (WHEN HEIGHT OR THICKNESS AND/OR OUTSIDE DIAMETER IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
CAGE Information
| Code | Company |
|---|---|
| 72914 | GRIMES AEROSPACE COMPANY DBA HONEYWE |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BZRR | THREAD SERIES | UNEF |
| ABQU | DRIVE POINT DEPTH | 0.188 INCHES NOMINAL |
| PRMT | PRECIOUS MATERIAL | SILVER |
| CQJX | NOMINAL THREAD SIZE | 1.687 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6381 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS6382 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION F |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ALET | HOLE TYPE AND QUANTITY | 8 DRILLED |
| AAJD | THREAD CLASS | 3B |
| AZKQ | TEMP RATING | NOT RATED |
| MATT | MATERIAL | STEEL OVERALL |
| ADBM | DRIVE POINT QUANTITY | 8 |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| ADBH | DRIVE POINT WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AGGP | DRILLED HOLE DIAMETER | 0.113 INCHES NOMINAL |
| ACTA | NUT STYLE | ROUND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ADBG | NUT THICKNESS | 0.312 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | SILVER OVERALL |
| ACTD | NUT DIAMETER | 2.438 INCHES NOMINAL |