Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , STRAIGHT
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
CAGE Information
| Code |
Company |
| 58275 |
SASCO INC CANADIAN DIV |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| FEAT |
SPECIAL FEATURES |
0.281 IN. W KEYWAY ON 2ND END; RAISED PORTION,2.125 IN. DIA LOCATED 9.750 IN. FROM EACH END |
| AMER |
FIRST END INTERNAL THREAD LENGTH |
1.000 INCHES NOMINAL |
| AMGT |
SECOND END DISTANCE FROM HOLE CENTER TO END |
14.875 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| AMDL |
FIRST END DIAMETER |
2.1040 INCHES MINIMUM AND 2.1050 INCHES MAXIMUM |
| AAHP |
SECOND END STYLE |
CROSS DRILLED AND EXTERNALLY THREADED |
| AMGS |
SECOND END HOLE DIAMETER |
0.3750 INCHES NOMINAL |
| AAGZ |
FIRST END STYLE |
INTERNAL THREADED |
| AMFZ |
SECOND END DIAMETER |
2.1040 INCHES MINIMUM AND 2.1050 INCHES MAXIMUM |
| AMHA |
SECOND END EXTERNAL THREAD LENGTH |
1.000 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
36.250 INCHES NOMINAL |
Similar Parts