National Stock Number (NSN) Output Data
NSN:
NIIN:
Item Name:
BEAM , STRUCTURAL
Definition:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| LS3214-2 | 98897 | A | 3 | 2 | 4 | 9Z |
CAGE Information
| Code | Company |
|---|---|
| 98897 | LOCKHEED MARTIN CORPORATION DBA LOCK |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABKW | OVERALL HEIGHT | 1.250 INCHES NOMINAL |
| ABRY | LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM |
| AARN | FABRICATION METHOD | EXTRUDED |
| AGTA | BASIC SHAPE STYLE | T SHAPE |
| BQJG | TOP FLANGE WIDTH | 1.750 INCHES NOMINAL |
| HEAT | HEAT TREATMENT | T-6 SOLUTION HEAT TREATED |
| CSMZ | LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| BPXG | RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.821 INCHES NOMINAL |
| BRFD | WEIGHT PER UNIT MEASURE | 0.380 POUNDS PER LINEAR FOOT |
| CRZC | RIGHT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| CNQL | THIRD TIP RELATIONSHIP TO PRECEDING TIPS | IDENTICAL W/FIRST TIP |
| BPXL | FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.062 INCHES NOMINAL |
| ADXS | RIGHT SIDE TOP FLANGE THICKNESS | 0.109 INCHES NOMINAL |
| BPXJ | FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.062 INCHES NOMINAL |
| CNQJ | SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL |
| CMZY | FIRST TIP STYLE | SQUARE END |
| MATL | MATERIAL | ALUMINUM ALLOY, QQ-A-200/11 |
| ADXR | LEFT SIDE TOP FLANGE THICKNESS | 0.109 INCHES NOMINAL |
| BPXD | LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.821 INCHES NOMINAL |
| AJJP | LEG THICKNESS | 0.109 INCHES NOMINAL |