Part Number
Definition:
AN ITEM OF VARIOUS CROSS-SECTIONAL SHAPES WHICH MAY BE OF SOLID OR HOLLOW CONSTRUCTION. IT IS SPECIFICALLY DESIGNED FOR ATTACHMENT TO A LEVER(S) AND/OR CONTROL(S) TO ACTUATE VARIOUS REMOTE MECHANISMS. IT IS ONE OF THE FOLLOWING: (1) A ONE-PIECE ITEM WITH OR WITHOUT EYES AND/OR HOLES IN EACH END WHICH MAY HAVE BUSHINGS OR BEARINGS PRESSED IN THE EYES; (2) A ONE-PIECE ITEM WITH BOTH ENDS PROCESSED FOR TERMINATIONS, EXCLUDING THREADED END(S); (3) A TWO-PIECE CONSTRUCTION TYPE ITEM CONSISTING OF A BODY WITH BOTH ENDS PROCESSED FOR TERMINATIONS AND A SINGLE END ATTACHMENT; OR (4) A THREE-PIECE CONSTRUCTION TYPE ITEM CONSISTING OF A BODY AND TWO END ATTACHMENTS. EXCLUDES INTERNAL COMBUSTION ENGINE TYPE PISTON CONNECTING RODS; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; AND TURNBUCKLE. FOR CYLINDRICAL SHAPED EXTERNALLY THREADED ITEMS WITHOUT END ATTACHMENTS, SEE ROD, THREADED END AND STUD (AS MODIFIED).
CAGE Information
| Code | Company |
|---|---|
| 30003 | NAVAL AIR SYSTEMS COMMAND |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | SPECIAL AIRCRAFT AND ENGINE TOOL AND SUPPORT EQUIPMENT |
| BFLD | END ATTACHMENT HOLE DIAMETER | 0.250 INCHES NOMINAL BOTH ENDS |
| AJUD | END ATTACHMENT STYLE | RAISED FACE, ROUND BOTH ENDS |
| MATT | MATERIAL | STEEL |
| AZHL | BODY CONSTRUCTION | TUBULAR |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | DRAW BAR ASSEMBLY |
| BFNL | END ATTACHMENT LENGTH | 2.000 INCHES NOMINAL BOTH ENDS |
| BFNQ | END ATTACHMENT WIDTH | 0.750 INCHES NOMINAL BOTH ENDS |
| FEAT | SPECIAL FEATURES | OVERALL LENGTH "AS REQUIRED". ROD ENDS, SPHERICAL - EXTERNAL THREADED; THREADS 1/4 - 28 UNF; ROD END, PIVITAL BUSHING 0.375 THICK (FROM ONE SIDE OF THE WHOLE TO THE OTHER); FLAT FACE OF ROD END 0.0.281 THICK, SOLID; THREAD LENGTH 1.000; THREADED END OF ROD END TO THE CENTER OF THE HOLE IN PIVITAL BUSHING 1 9/16; DRAW BAR TUBE 5 1/8L X 0.375DIA; ENDS OF TUBE DRILLED/TAPPED 0.213 DIA X 1.500 DEEP. TAP - 1/4-28 UNF X 1.000 DEEP FULL THREAD CHAMPHER 1ST THREAD AT 45.0. FINISH - DRAW BAR TUBE IAW MIL-STD-808, F-100 DG, TYPE 1. DRAW BAR ASSEMBLY - ROD END ADJUSTMENT FROM DRAW BAR TUBE TO CENTER OF HOLE IN ROD END - MAX 1 1/8 (TYP). |
| SFTT | SURFACE TREATMENT | CADMIUM |