Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 52151 | CONTINENTAL ELECTRONICS CORPORATION |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMFZ | SECOND END DIAMETER | 0.3745 INCHES MINIMUM AND 0.3747 INCHES MAXIMUM |
| AMFZ | SECOND END DIAMETER | 0.3745 INCHES MINIMUM AND 0.3747 INCHES MAXIMUM |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| MATT | MATERIAL | STEEL COMP 303 |
| CSPY | LARGEST STEP DIAMETER | 0.500 INCHES NOMINAL |
| AMDE | FIRST END EXTERNAL KEYWAY LENGTH | 0.625 INCHES NOMINAL |
| AMFS | SECOND END EXTERNAL KEYWAY LENGTH | 1.000 INCHES NOMINAL |
| AMFR | SECOND END KEYWAY WIDTH | 0.0930 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | FLAT KEYWAY |
| AMDG | FIRST END KEYWAY DEPTH | 0.047 INCHES NOMINAL |
| AMCZ | FIRST END KEYWAY WIDTH | 0.0930 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES |
| AAHP | SECOND END STYLE | FLAT KEYWAY |
| AMFT | SECOND END KEYWAY DEPTH | 0.046 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 12.880 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 3 |
| AMDL | FIRST END DIAMETER | 0.3120 INCHES MINIMUM AND 0.3122 INCHES MAXIMUM |