Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
| Code | Company |
|---|---|
| 78570 | SMITHS TUBULAR SYSTEMS-LACONIA INC. |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ADJS | EXTERIOR COLOR | NATURAL |
| CQGM | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| CQBD | BURST TEST PRESSURE | 14000.0 POUNDS PER SQUARE INCH |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 1ST END |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 5.000 INCHES |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| ADJM | INNER CONVEYING TUBE MATERIAL | PLASTIC, POLYTETRAFLUOROETHYLENE |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| AHNC | CONNECTION STYLE | FLARED 1ST END |
| ABKV | OUTSIDE DIAMETER | 0.375 INCHES NOMINAL |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| AAJP | OUTSIDE SURFACE TREATMENT | PASSIVATED |
| ADLF | HOSE OR TUBING SPEC/STD DATA | MIL-H-38360 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AAJD | THREAD CLASS | 2A 1ST END |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| CQHW | FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATED |
| CRXX | MEASURING METHOD AND LENGTH | 34.500 INCHES NOMINAL OVERALL |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 180.0 |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL, CORROSION RESISTING |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| AARX | INSIDE DIAMETER | 0.298 INCHES NOMINAL |
| CQJX | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |