Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , SHOULDERED
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AMFZ |
SECOND END DIAMETER |
0.3000 INCHES NOMINAL |
| AAHP |
SECOND END STYLE |
CIRCULAR GROOVED |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| AAGZ |
FIRST END STYLE |
PLAIN |
| MATT |
MATERIAL |
STEEL COMP 303 |
| ABHP |
OVERALL LENGTH |
1.062 INCHES NOMINAL |
| AMDL |
FIRST END DIAMETER |
0.2497 INCHES NOMINAL |
| AGAV |
END ITEM IDENTIFICATION |
TRAINING SET,RADAR SET AN/MPQ-T2 |
| AAHX |
SECOND END GROOVE DIAMETER |
0.2100 INCHES NOMINAL |
| AAHW |
SECOND END GROOVE WIDTH |
0.0250 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-7720 MIL STD 1ST MATERIAL RESPONSE |
| ATPC |
STEP QUANTITY |
3 |
| FEAT |
SPECIAL FEATURES |
0.030 IN. BY 45 DEG CHAMFER 1ST END |
| AMFQ |
SECOND END DISTANCE FROM END TO GROOVE |
0.030 INCHES NOMINAL |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES |
| CSPY |
LARGEST STEP DIAMETER |
0.300 INCHES NOMINAL |
Similar Parts