Part Number
Part Number:
NSN:
NIIN:
Item Name:
SYNCHRO , CONTROL TRANSFORMER
Definition:
A SYNCHRO CONSISTING OF A STATOR AND ROTOR INDUCTIVELY COUPLED. THE ELECTRICAL OUTPUT OF THE ROTOR IS DEPENDENT UPON BOTH THE POSITION OF THE ROTOR AND THE ELECTRICAL INPUT TO THE STATOR FROM A TRANSMITTER SYNCHRO OR A DIFFERENTIAL SYNCHRO. DOES NOT INCLUDE VARIABLE RESISTORS, GONIOMETERS, OR VARIABLE TRANSFORMERS.
CAGE Information
| Code | Company |
|---|---|
| 03956 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
Federal Supply Class
Title
SYNCHROS AND RESOLVERS
Inclusions:
Exclusions:
EXCLUDES SYNCHRO SYSTEMS; SERVO MECHANISMS.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAVL | PILOT DIAMETER | 0.6250 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.6250 INCHES MAXIMUM |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | 130.00 MINIMUM AND 170.00 MAXIMUM |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 15.00 OUTPUT |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.07 INCH-OUNCES MAXIMUM |
| CQTM | TERMINAL LOCATION | REAR |
| AJSP | STATOR INPUT CURRENT RATING | 86.0 MILLIAMPERES MAXIMUM |
| AAVH | SHOULDER DIAMETER | 1.0000 INCHES MAXIMUM |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 18.00 |
| AJSS | FREQUENCY IN HERTZ | 396.0 MINIMUM AND 404.0 MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 150.0 WATTS NOMINAL |
| AJWR | SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| AAQL | BODY STYLE | STANDARD ROUND B |
| ABKK | FLANGE DIAMETER | 1.0620 INCHES MAXIMUM |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| TEST | TEST DATA DOCUMENT | 81349-MIL-S-20708 SPECIFICATION |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| ABXF | SHAFT LENGTH | 0.5620 INCHES NOMINAL SINGLE SHAFT |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.112 INCHES |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | 78.00 MINIMUM AND 84.00 MAXIMUM |
| AJVM | SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| AHYF | SECURING HOLE QUANTITY | 4 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | 118.00 MINIMUM AND 150.00 MAXIMUM |
| AAFZ | BODY MATERIAL | STEEL, CORROSION RESISTING |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
| CQWQ | SHAFT THREAD LENGTH | 0.1970 INCHES NOMINAL SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | 23.00 MINIMUM AND 35.00 MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
| ABHP | OVERALL LENGTH | 2.3560 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7320 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1872 INCHES NOMINAL SINGLE SHAFT |
| AHCG | MAXIMUM TEMP RISE | 10.0 DEG CELSIUS |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0/+7.0 |
| AJVF | PHASE SHIFT ANGLE IN DEG | 3.000 INPUT TO OUTPUT MINIMUM AND 6.000 INPUT TO OUTPUT MAXIMUM |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |