Part Number
Part Number:
NSN:
NIIN:
Item Name:
PIN , TAPERED , THREADED
Definition:
A CONE-SHAPED HEADLESS ITEM, HAVING A THREADED PORTION AT EITHER END. IT IS USED FOR ALIGNING, FASTENING, AND THE LIKE BY FITTING INTO A CORRESPONDING TAPER REAMED HOLE.
CAGE Information
| Code | Company |
|---|---|
| 98750 | SAN ANTONIO AIR LOGISTICS CENTER |
Federal Supply Class
Title
NAILS, MACHINE KEYS, AND PINS
Inclusions:
INCLUDES DOWEL PINS, SPLIT PINS; SPIKES; TACKS; NONOFFICE TYPE STAPLES; MACHINE KEYS; BRADS; SHOULDERED PINS; COTTER PINS; NAILS.
Exclusions:
EXCLUDES SHAFTS (FSC 3040); LOCK KEYS (FSC 5340).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,CONDF4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATT | MATERIAL | STEEL COMP 4130 OVERALL |
| STYL | STYLE DESIGNATOR | THREADED AT SMALL END |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| ABQB | TAPER MAJOR DIAMETER | 0.500 INCHES NOMINAL |
| AAHP | SECOND END STYLE | RADIUS |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DOD-P-16232,TYPEM,CL3,ORTYPER TYPE Z, CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAJD | THREAD CLASS | 3A |
| FEAT | SPECIAL FEATURES | OVERALL LENGTH IS 3.5 INCHES;THREADS PER MIL-S-8879;SHARP EXTERNAL CORNERS SHALL HAVE A .005 TO .015 INCH RADIUS OR .005 INCH BY 45 DEGREE CHAMFER;HEAT TREAT TO 160-180 KSI PER MIL-H-6875;SOLID FILM LUBE ALL SURFACES PER MIL-L-46010, EXEPT THREADS;MAGNETIC PARTICLE INSPECTION PER ASTM E 1444;SHOULDER 0.047 INCHES WIDE;SMALL END DIAMETER 0.317 NOMINALLY |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AGAV | END ITEM IDENTIFICATION | ACTUATOR HORN, RUDDER, FREEDOM FIGHTER F-5 AIRCRAFT |
| CQRR | TAPER | 0.500 PER FOOT IN INCHES |
| CRDY | FIRST END LOCATION | THREADED END |
| AASA | THREAD LENGTH | 0.406 INCHES NOMINAL |
| AMCS | FIRST END TAPER LENGTH | 0.027 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | PHOSPHATE OVERALL |
| ABND | TAPER LENGTH | 2.860 INCHES MINIMUM AND 2.891 INCHES MAXIMUM |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| ALWS | SECOND END CORNER RADIUS | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM |
| AAGZ | FIRST END STYLE | CHAMFERED |
| ABQA | TAPER MINOR DIAMETER | 0.191 INCHES MINIMUM AND 0.201 INCHES MAXIMUM |
| CTHL | ANGLE BETWEEN CENTERLINE OF HOLES | 45.0 DEGREES NOMINAL |