Part Number
Part Number:
NSN:
NIIN:
Item Name:
WASHER , FLAT
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
CAGE Information
| Code |
Company |
| 24446 |
GENERAL ELECTRIC CO |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
B8A3,GENERAL ELECTRIC CO.,SYNN RIVER WORKS MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
B8A3,GENERAL ELECTRIC CO.,SYNN RIVER WORKS MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
RECTANGULAR |
| ABMX |
CENTER HOLE SHAPE STYLE |
ROUND |
| ABGL |
WIDTH |
1.193 INCHES MINIMUM AND 1.246 INCHES MAXIMUM |
| AAUB |
HOLE DIAMETER |
0.800 INCHES MINIMUM AND 0.810 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
L1-08027-MFR-81893 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| ABMW |
PERIPHERAL SHAPE STYLE |
DEE |
| MATT |
MATERIAL |
STEEL OVERALL |
| ABNM |
THICKNESS |
0.081 INCHES MINIMUM AND 0.101 INCHES MAXIMUM |
| ADAV |
OVERALL DIAMETER |
1.307 INCHES MINIMUM AND 1.332 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
Similar Parts