Part Number
Part Number:
NSN:
NIIN:
Item Name:
PUMP UNIT , CENTRIFUGAL
Definition:
AN ASSEMBLED UNIT CONSISTING OF A COMMONLY MOUNTED CENTRIFUGAL PUMP(S), PRIME MOVER(S), AND THE NECESSARY COMPONENTS TO PROVIDE FOR A COMPLETE OPERATION.
CAGE Information
| Code | Company |
|---|---|
| 10941 | CARVER PUMP COMPANY INC |
Federal Supply Class
Title
POWER AND HAND PUMPS
Inclusions:
Exclusions:
EXCLUDES LABORATORY JET PUMPS (FSG 65 AND 66).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AHYX | TOTAL HEAD | 127.000 FEET |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| AHZF | CENTRIFUGAL PUMP IMPELLER QUANTITY | 1 |
| AENC | PUMP QUANTITY | 1 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PUMP, HOT WATER BOOSTER |
| CSYL | PRIME MOVER POWER RATING | 5.0 HORSEPOWER |
| AKDJ | PRIME MOVER TYPE | ELECTRIC MOTOR |
| FAAZ | PHASE | THREE |
| FEAT | SPECIAL FEATURES | PUMP SIZE 1.25 X 1-7 CLOSE COUPLED WITH 1.25IN. SUCTION CLASS 150 FLANGE ANSI B16.5, 1IN. DISCHARGE CLASS 150 FLANGE ANSI B16.5; NPSHA 75 PSI; SUBMERGENCE FLOODED; SUCTION TEMPERATURE 110 DEG F; ACTUAL SHUT OFF HEAD 141.5 FT.; SPEED (AT CONDITION) 3572 RPM; EFFICIENCY (AT CONDITION) 50.9% RATED INPUT 3.15 BHP; MAX. RATED INPUT AT ANY CONDITION 3.51 BHP; HYDROSTATIC TEST PRESSURE 100 PSI/30 MIN; IMPELLER FINISH DIAMETER 5.75IN; ORIFICE DIAMETER .75IN.; MOTOR CONTINUOUS DUTY, CONSTANT SPEED BUILT PER MIL-M-1760E; SPEED (SYCH) 3600 RPM; WINDINGS SQUIRREL CAGE; PERMISSIBLE AMBIENT TEMPERATURE 50 DEG C; ENCLOSURE TEFC; BEARINGS BALL; FRAME 213TNCZ; MOTOR MOUNTING HORIZONTAL |
| AHZA | PUMPING ELEMENT OPERATING POSITION | HORIZONTAL |
| AAXH | PRIME MOVER QUANTITY | 1 |
| ACKL | MEDIA FOR WHICH DESIGNED | WATER, FRESH |
| ACDC | CURRENT TYPE | AC |
| AHYV | MAXIMUM DISCHARGE FLOW RATE | 50.0 GALLONS PER MINUTE |
| ELEC | VOLTAGE IN VOLTS | 440.0 |