Part Number
Part Number:
NSN:
NIIN:
Item Name:
TERMINAL BOARD
Definition:
AN ITEM CONSISTING OF INSULATING MATERIAL, WHICH IS SPECIFICALLY DESIGNED TO HAVE FASTENED THEREON, OR ON WHICH ARE FASTENED TERMINAL(S), SUCH AS SCREWS, SOLDER LUGS, SOLDER STUDS, SOLDERLESS CONNECTORS, CLIPS, AND THE LIKE. IT IS USUALLY USED FOR JUNCTIONS OR TERMINATIONS OF WIRE OR CABLE ASSEMBLIES. IT DOES NOT INCLUDE ITEMS AS DEFINED ABOVE WITH PARTS, SUCH AS RESISTORS AND CAPACITORS MOUNTED THEREON. DO NOT USE IF A MORE SPECIFIC NAME EXISTS, SUCH AS FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (AS MODIFIED); CONNECTOR (AS MODIFIED). EXCLUDES TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; AND CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. FOR ITEMS HAVING PRINTED ELECTRICAL CONDUCTOR PATHS, SEE PRINTED WIRING BOARD.
CAGE Information
| Code |
Company |
| 18876 |
U S ARMY AVIATION AND MISSILE COMMAN |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| ABGP |
BOARD OVERALL WIDTH |
1.500 INCHES |
| ABGP |
BOARD OVERALL WIDTH |
1.500 INCHES |
| ABCX |
BOARD CONSTRUCTION |
SOLID CONSTRUCTION |
| MATT |
MATERIAL |
PLASTIC BOARD |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
4 UNTHREADED HOLE |
| ABGT |
BOARD THICKNESS |
0.063 INCHES |
| MARK |
SPECIAL MARKINGS |
CR16,CR13,CR15,CR14,CR12,CR11,R62,R61,R59,R60 |
| ABCS |
TERMINAL ROW QUANTITY |
2 |
| CWLG |
TERMINAL PATTERN ARRANGEMENT |
MULTI-ROW |
| CSCS |
NONFEEDTHRU TERMINAL QUANTITY |
20 SINGLE |
| ABDW |
DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE |
0.220 INCHES |
| AAQL |
BODY STYLE |
STRIP TYPE |
| CWLN |
TERMINAL DESIGN |
NONFEEDTHRU |
| AAMA |
MOUNTING HOLE DIAMETER |
0.170 INCHES |
| ABGN |
BOARD OVERALL LENGTH |
4.740 INCHES |
| ABCT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.375 INCHES |
| ABCU |
DISTANCE BETWEEN TERMINAL ROW CENTERS |
1.062 INCHES |
| ABDU |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
4.460 INCHES |
| ABDV |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH |
1.062 INCHES |
| CRNL |
NONFEEDTHRU TERMINAL TYPE |
442 SINGLE |
| ABDX |
DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY |
0.140 INCHES |
Similar Parts