Part Number
Part Number:
NSN:
NIIN:
Item Name:
TERMINAL BOARD
Definition:
AN ITEM CONSISTING OF INSULATING MATERIAL, WHICH IS SPECIFICALLY DESIGNED TO HAVE FASTENED THEREON, OR ON WHICH ARE FASTENED TERMINAL(S), SUCH AS SCREWS, SOLDER LUGS, SOLDER STUDS, SOLDERLESS CONNECTORS, CLIPS, AND THE LIKE. IT IS USUALLY USED FOR JUNCTIONS OR TERMINATIONS OF WIRE OR CABLE ASSEMBLIES. IT DOES NOT INCLUDE ITEMS AS DEFINED ABOVE WITH PARTS, SUCH AS RESISTORS AND CAPACITORS MOUNTED THEREON. DO NOT USE IF A MORE SPECIFIC NAME EXISTS, SUCH AS FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (AS MODIFIED); CONNECTOR (AS MODIFIED). EXCLUDES TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; AND CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. FOR ITEMS HAVING PRINTED ELECTRICAL CONDUCTOR PATHS, SEE PRINTED WIRING BOARD.
CAGE Information
| Code |
Company |
| 18876 |
U S ARMY AVIATION AND MISSILE COMMAN |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| ABCX |
BOARD CONSTRUCTION |
SOLID CONSTRUCTION |
| ABCX |
BOARD CONSTRUCTION |
SOLID CONSTRUCTION |
| MATT |
MATERIAL |
PLASTIC BOARD |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
4 UNTHREADED HOLE |
| ABGT |
BOARD THICKNESS |
0.063 INCHES |
| ABCU |
DISTANCE BETWEEN TERMINAL ROW CENTERS |
0.250 INCHES |
| ABGN |
BOARD OVERALL LENGTH |
2.880 INCHES |
| ABCT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.740 INCHES |
| ABCS |
TERMINAL ROW QUANTITY |
2 |
| AAMA |
MOUNTING HOLE DIAMETER |
0.137 INCHES |
| CWLG |
TERMINAL PATTERN ARRANGEMENT |
MULTI-ROW |
| AAQL |
BODY STYLE |
STRIP TYPE |
| CWLN |
TERMINAL DESIGN |
NONFEEDTHRU |
| CSCS |
NONFEEDTHRU TERMINAL QUANTITY |
13 SINGLE |
| ABDX |
DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY |
0.120 INCHES |
| ABGP |
BOARD OVERALL WIDTH |
1.120 INCHES |
| ABDV |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH |
0.562 INCHES |
| MARK |
SPECIAL MARKINGS |
R33,R34,R4,R2,CR1,CR2,CR3,CR4,CR5,R3 |
| CRNL |
NONFEEDTHRU TERMINAL TYPE |
442 SINGLE |
| ABDU |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
2.625 INCHES |
| ABDW |
DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE |
0.378 INCHES |
Similar Parts