Part Number
Part Number:
NSN:
NIIN:
Item Name:
FILTER , RADIO FREQUENCY INTERFERE
Definition:
AN ITEM DESIGNED TO SUPPRESS UNDESIRED (INTERFERING) FREQUENCIES AND HAVE A MINIMAL EFFECT ON THE DESIRED FREQUENCIES WHEN INSERTED IN AN ELECTRICAL POWER CIRCUIT. EXCLUDES ITEMS WHICH CONSIST OF A SINGLE CAPACITOR, INDUCTOR, RESISTOR, OR DEVICES CONSISTING OF ONLY TWO OR MORE CIRCUIT ELEMENTS OF THE SAME BASIC NAME. EXCLUDES FILTER, LOW PASS AND SUPPRESSOR, IGNITION INTERFERENCE. FOR ITEMS DESIGNED TO BE INSERTED IN A LINE WHICH IS PRIMARILY INTENDED TO CARRY HIGH FREQUENCY WAVES MODULATED WITH SIGNALS, SUCH AS ANTENNA LEAD-IN, SEE FILTER, BAND SUPPRESSION AND FILTER, BAND PASS. SEE ALSO LIMITER, ELECTRICAL NOISE.
CAGE Information
| Code | Company |
|---|---|
| 13619 | RFI CORPORATION |
Federal Supply Class
Title
FILTERS AND NETWORKS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AHAS | LOAD IMPEDANCE PER FUNCTION | 50.0 OHMS BLANK |
| ADAU | BODY HEIGHT | 2.000 INCHES NOMINAL |
| CQRG | BODY MATERIAL | METAL |
| AFGA | OPERATING TEMP RANGE | +0.0/+115.0 DEG CELSIUS |
| ABHP | OVERALL LENGTH | 1.375 INCHES NOMINAL |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | 0.156 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 2.718 INCHES NOMINAL |
| CQGC | OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | 5.0 KILOVOLTS 23RD BAND SUPPRESSION NOT SPECIFIED |
| ABMK | OVERALL WIDTH | 0.875 INCHES NOMINAL |
| ADAR | BODY OUTSIDE DIAMETER | 0.670 INCHES NOMINAL |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 TAB, SOLDER LUG OUTPUT |
| AHAQ | SOURCE IMPEDANCE RATING PER FUNCTION | 50.0 OHMS BLANK |
| AHBC | OPERATING CURRENT RATING PER FUNCTION IN AMPS | 1.0 BLANK |
| STYL | STYLE DESIGNATOR | ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES |
| AKNA | INCLOSURE TYPE | ENCASED |
| AHBX | DISTANCE BETWEEN MOUNTING SURFACE AND LOWER END | 0.359 INCHES NOMINAL |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 TAB, SOLDER LUG INPUT |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 1.062 INCHES NOMINAL |