Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT. UNIFORM CONTACT PRESSURE ON THE RESISTANCE ELEMENT IS MAINTAINED BY POSITIVE PRESSURE TO PERMIT SMOOTH ELECTRICAL AND MECHANICAL CONTROL OF THE RESISTOR OVER THE ENTIRE RESISTANCE RANGE. THE RESISTIVE ELEMENT IS CONSTRUCTED OF A COMBINATION OF TWO MATERIALS USUALLY CONSISTING OF A WIREWOUND ELEMENT WITH A COATING OF CONDUCTIVE PLASTIC APPLIED OVER THE RESISTANCE WIRE WHERE THE SLIDER MAKES CONTACT. MAY BE CONSTRUCTED OF A SINGLE OR MULTITURNS OF WIRE SUPPORTED ON AN INSULATING STRUCTURE ON WHICH THE WIPER CONTACTS THE COATED WIRE CONTINUOUSLY IN THE DIRECTION OF WIPER TRAVEL. THE OPPOSITION TO THE FLOW OF CURRENT IS AN INHERENT PROPERTY OF THE WIRE USED AND IS MANIFESTED IN THE HEAT DISSIPATED IN THE RESISTOR ITSELF. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT; AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES OTHER RESISTOR (1), VARIABLE, (AS MODIFIED).
CAGE Information
| Code | Company |
|---|---|
| 25805 | TRANSICOIL LLC DBA ADS TRANSICOIL US |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AEFL | MAXIMUM RUNNING TORQUE | 0.15 INCH-OUNCES |
| AAPN | SECTION QUANTITY | 1 |
| AEDX | SHAFT STYLE | ROUND |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TURRET |
| CBME | CUBIC MEASURE | 0.656 CUBIC INCHES |
| AGAV | END ITEM IDENTIFICATION | 6620-01-172-6946 INDICATOR,TORQUE |
| AECZ | MOUNTING LIP DIAMETER | 0.8700 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -70.0/+70.0 SINGLE SECTION |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFK | MAXIMUM STARTING TORQUE | 0.20 INCH-OUNCES |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| ABWV | SHAFT DIAMETER | 0.1245 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
| AAVL | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 60.0 SINGLE SECTION |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES |
| ABXF | SHAFT LENGTH | 0.220 INCHES MINIMUM AND 0.282 INCHES MAXIMUM |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25/+0.25 SINGLE SECTION |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 1080.0 MINIMUM AND 1084.0 MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.781 INCHES MAXIMUM |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 1080.0 MINIMUM AND 1084.0 MAXIMUM |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS SINGLE SECTION |
| AEFZ | SHAFT RUNOUT | 0.0005 INCHES |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| AXGY | MOUNTING METHOD | CLAMP RING |
| APXH | TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 SINGLE SECTION |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| ADAQ | BODY LENGTH | 1.080 INCHES MAXIMUM |
| AEGA | LATERAL RUNOUT | 0.0015 INCHES |
| AAVM | PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AEDA | MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM |
| AEFY | SHAFT END PLAY | 0.005 INCHES |