Part Number
Part Number:
NSN:
NIIN:
Item Name:
HINGE , BUTT
Definition:
A HINGE USUALLY WITH RECTANGULARLY SHAPED LEAVES. THE DIMENSION PARALLEL TO THE HINGE PIN MUST BE GREATER THAN THE DIMENSION TRANSVERSE TO THE HINGE PIN. IT MAY HAVE A TENSION COIL SPRING AT ITS PIVOT(S) FOR CLOSING ACTION, AND MAY HAVE A THIRD MEMBER BETWEEN ITS PIVOT(S) TO PERMIT THE DOOR, OR THE LIKE, TO SWING IN AN ARC FROM EITHER SIDE.
CAGE Information
| Code | Company |
|---|---|
| 76301 | BOEING COMPANY THE DBA BOEING |
Federal Supply Class
Title
HARDWARE, COMMERCIAL
Inclusions:
INCLUDES ACCESS COVERS; BUMPERS; CASTERS; CABINET AND DOOR HARDWARE; CLEVISES; HINGES; LATCHES; STRAPS AND STRAPPING; TURNBUCKLES; WEBBED STRAPS.
Exclusions:
EXCLUDES WEAPONS SYSTEM HARDWARE (FSC 5342).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABTJ | MOUNTING HOLE QUANTITY | 6 |
| AJNC | REVERSIBLE FEATURE | NOT INCLUDED |
| ABTB | MOUNTING HOLE DIAMETER | 0.1635 INCHES MINIMUM AND 0.1657 INCHES MAXIMUM |
| STYL | STYLE DESIGNATOR | BUTT PARALLEL HOLES |
| AKNB | KNUCKLE TYPE | FRICTION |
| AKES | PIN REMOVABILITY | NONREMOVABLE |
| FEAT | SPECIAL FEATURES | ITEM IS CHAMFERED 0.020 IN. X 45 DEG ON EACH END W/DIST FROM BODY EDGE TO HOLE CNTR 0.350 IN. ALONG LG AND WIDTH,HINGE PIN P/N MS20253P4-253; ITEM IS USED ON CONF. FUEL TANK OF F-15 AIRCRAFT |
| AGLD | PERFORMANCE TYPE | NOT RATED |
| ADJH | MOUNTING METHOD | UNTHREADED HOLES |
| AKER | HINGE MOUNTING TYPE | FULL MORTISE |
| AKEX | KNUCKLE QUANTITY | 6 |