Part Number
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
CAGE Information
| Code | Company |
|---|---|
| 11757 | PARKER-HANNIFIN CORPORATION DBA CHEL |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.0230 INCHES MINIMUM AND 1.0800 INCHES MAXIMUM |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMGA | SECOND END SPLINE LENGTH | 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE |
| FEAT | SPECIAL FEATURES | SECOND END HAS PARIAL BORE WITH UNTHREADED 0.156 INCH DIAMETER LOCATED ON ONE SIDE |
| AAHW | SECOND END GROOVE WIDTH | 0.0730 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 16.0 MICROINCHES |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 0.437 INCHES NOMINAL |
| AAHP | SECOND END STYLE | CIRCULAR GROOVED AND SPLINED (STRAIGHT) |
| AAHX | SECOND END GROOVE DIAMETER | 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.2495 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 2.094 INCHES NOMINAL |
| MATT | MATERIAL | STEEL |
| AAGZ | FIRST END STYLE | THREADED CROSS DRILLED (THRU HOLE) |
| AMFZ | SECOND END DIAMETER | 1.2495 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 7.125 INCHES NOMINAL |
| BDSR | SECOND END SPLINE QUANTITY | 10 |
| AMDL | FIRST END DIAMETER | 1.2495 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |