Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 34228 | KOLLMORGEN CORPORATION DBA KOLLMORGE |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 0.2050 INCHES MINIMUM AND 0.2100 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 303 |
| AMDL | FIRST END DIAMETER | 0.1872 INCHES MINIMUM AND 0.1874 INCHES MAXIMUM |
| AAHH | FIRST END GROOVE DIAMETER | 0.1730 INCHES MINIMUM AND 0.1770 INCHES MAXIMUM |
| CSPY | LARGEST STEP DIAMETER | 0.275 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | CIRCULAR GROOVED |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE |
| ABHP | OVERALL LENGTH | 3.125 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 3 |
| AAHG | FIRST END GROOVE WIDTH | 0.0300 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM |
| AMHP | SECOND END INTERNAL THREAD LENGTH | 0.2500 INCHES NOMINAL |