Part Number
Definition:
AN ITEM FABRICATED FROM ELECTRICALLY NONCONDUCTIVE MATERIAL SPECIFICALLY DESIGNED TO PROVIDE A SUPPORT FOR MOUNTING AN ELECTRICAL AND/OR AN ELECTRONIC COMPONENT SUCH AS A SEMICONDUCTOR DEVICE, RELAY, OR RESISTOR INTO THE NEXT HIGHER ASSEMBLY. IT ISOLATES THE COMPONENT FROM THE MOUNTING SURFACE OF THE NEXT HIGHER ASSEMBLY, IT MAY ACT AS A STRAIN RELIEF TO AVOID DAMAGE TO THE COMPONENT SEAL, AND IT MAY PERMIT SOLDERING OF THE COMPONENT TO THE NEXT HIGHER ASSEMBLY WITHOUT DAMAGE. IT INCLUDES HOLES, NOTCHES, OR OTHER PROVISIONS FOR PHYSICAL ALIGNMENT AND SPACING OF ELECTRICAL LEADS AND/OR OTHER MOUNTING FACILITIES PROJECTING FROM THE COMPONENT IT MOUNTS. IT MAY ALSO AFFORD PROTECTION FROM SHOCK OR VIBRATION. IT MAY BE EITHER NONTHERMALLY CONDUCTIVE WHICH PROTECTS THE COMPONENT FROM TEMPERATURE CHANGES IN THE NEXT HIGHER ASSEMBLY OR IT MAY BE THERMALLY CONDUCTIVE WHICH PERMITS HEAT GENERATED IN THE COMPONENT TO BE DRAINED OUT TO A HEAT SINK. FOR ITEMS WHOSE FUNCTION IS ELECTRICAL INSULATION ONLY, SEE INSULATOR, (AS MODIFIED). EXCLUDES HOLDER, (AS MODIFIED); RETAINER, (AS MODIFIED), AND SPACER, PLATE.
CAGE Information
| Code | Company |
|---|---|
| 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION |
Federal Supply Class
Title
MISCELLANEOUS ELECTRICAL AND ELE
Inclusions:
INCLUDES PERMANENT MAGNETS AND MAGNETOSTRICTION ELEMENTS; CAPS, CLIPS, AND CONTACTS, ELECTRICAL.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAQL | BODY STYLE | DISK |
| AGAV | END ITEM IDENTIFICATION | 7025-01-509-3748 |
| HUES | COLOR | NATURAL |
| CZGX | ACCOMMODATED DEVICE MOUNTING HOLE PATTERN STYLE | TEN HOLE - 0.380 INCH |
| TEST | TEST DATA DOCUMENT | 58536-A-55485/02-042D SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| ADAV | OVERALL DIAMETER | 0.380 INCHES NOMINAL |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 10 UNTHREADED HOLE SINGLE MOUNTING FACILITY |
| ZZZK | SPECIFICATION/STANDARD DATA | 58536-A-A-55485 GOVERNMENT SPECIFICATION |
| MATT | MATERIAL | PLASTIC DIALLYL PHTHALATE |
| ABKW | OVERALL HEIGHT | 0.025 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | 0.145 IN. DIA. PIN CENTER THUR HOLE |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | 0.025 INCHES NOMINAL SINGLE MOUNTING FACILITY |