Part Number
Definition:
AN ITEM FABRICATED FROM ELECTRICALLY NONCONDUCTIVE MATERIAL SPECIFICALLY DESIGNED TO PROVIDE A SUPPORT FOR MOUNTING AN ELECTRICAL AND/OR AN ELECTRONIC COMPONENT SUCH AS A SEMICONDUCTOR DEVICE, RELAY, OR RESISTOR INTO THE NEXT HIGHER ASSEMBLY. IT ISOLATES THE COMPONENT FROM THE MOUNTING SURFACE OF THE NEXT HIGHER ASSEMBLY, IT MAY ACT AS A STRAIN RELIEF TO AVOID DAMAGE TO THE COMPONENT SEAL, AND IT MAY PERMIT SOLDERING OF THE COMPONENT TO THE NEXT HIGHER ASSEMBLY WITHOUT DAMAGE. IT INCLUDES HOLES, NOTCHES, OR OTHER PROVISIONS FOR PHYSICAL ALIGNMENT AND SPACING OF ELECTRICAL LEADS AND/OR OTHER MOUNTING FACILITIES PROJECTING FROM THE COMPONENT IT MOUNTS. IT MAY ALSO AFFORD PROTECTION FROM SHOCK OR VIBRATION. IT MAY BE EITHER NONTHERMALLY CONDUCTIVE WHICH PROTECTS THE COMPONENT FROM TEMPERATURE CHANGES IN THE NEXT HIGHER ASSEMBLY OR IT MAY BE THERMALLY CONDUCTIVE WHICH PERMITS HEAT GENERATED IN THE COMPONENT TO BE DRAINED OUT TO A HEAT SINK. FOR ITEMS WHOSE FUNCTION IS ELECTRICAL INSULATION ONLY, SEE INSULATOR, (AS MODIFIED). EXCLUDES HOLDER, (AS MODIFIED); RETAINER, (AS MODIFIED), AND SPACER, PLATE.
CAGE Information
| Code | Company |
|---|---|
| 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION |
Federal Supply Class
Title
MISCELLANEOUS ELECTRICAL AND ELE
Inclusions:
INCLUDES PERMANENT MAGNETS AND MAGNETOSTRICTION ELEMENTS; CAPS, CLIPS, AND CONTACTS, ELECTRICAL.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 10 UNTHREADED HOLE FIRST MOUNTING FACILITY |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE THIRD MOUNTING FACILITY |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 1 UNTHREADED HOLE FOURTH MOUNTING FACILITY |
| ABHP | OVERALL LENGTH | 0.370 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 0.120 INCHES NOMINAL |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE SECOND MOUNTING FACILITY |
| TEST | TEST DATA DOCUMENT | 58536-A-A-55485 SPECIFICATION |
| MATT | MATERIAL | PLASTIC DIALLYL PHTHALATE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14,TYPE SDG MIL SPEC SINGLE MATERIAL RESPONSE |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | 0.145 INCHES NOMINAL FOURTH MOUNTING FACILITY |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | 0.055 INCHES NOMINAL SECOND MOUNTING FACILITY |
| ABMK | OVERALL WIDTH | 0.370 INCHES NOMINAL |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | 0.065 INCHES NOMINAL THIRD MOUNTING FACILITY |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | 0.025 INCHES NOMINAL FIRST MOUNTING FACILITY |
| ZZZK | SPECIFICATION/STANDARD DATA | 58536-A-A-55485/5 GOVERNMENT SPECIFICATION |