Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 72166 | B.W. ELLIOTT MANUFACTURING CO. LLC D |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMER | FIRST END INTERNAL THREAD LENGTH | 0.5000 INCHES MINIMUM |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | CENTER SPINDLE |
| AMDL | FIRST END DIAMETER | 0.3680 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 3.410 INCHES NOMINAL |
| MATT | MATERIAL | STEEL |
| ATPC | STEP QUANTITY | 3 |
| AGAV | END ITEM IDENTIFICATION | LOS ANGELES CLASS 688; 300 DEG SWIVEL GEAR JOINT ASSEMBLY P/N 12111M502A |
| CSPY | LARGEST STEP DIAMETER | 0.620 INCHES MINIMUM AND 0.622 INCHES MAXIMUM |
| AAGZ | FIRST END STYLE | INTERNAL THREADED |
| FEAT | SPECIAL FEATURES | THREADS ARE 10-32 UNC-28 |
| AAHN | END SIMILARITY | IDENTICAL |