Part Number
Definition:
AN ITEM CONSISTING OF INSULATING MATERIAL, WHICH IS SPECIFICALLY DESIGNED TO HAVE FASTENED THEREON, OR ON WHICH ARE FASTENED TERMINAL(S), SUCH AS SCREWS, SOLDER LUGS, SOLDER STUDS, SOLDERLESS CONNECTORS, CLIPS, AND THE LIKE. IT IS USUALLY USED FOR JUNCTIONS OR TERMINATIONS OF WIRE OR CABLE ASSEMBLIES. IT DOES NOT INCLUDE ITEMS AS DEFINED ABOVE WITH PARTS, SUCH AS RESISTORS AND CAPACITORS MOUNTED THEREON. DO NOT USE IF A MORE SPECIFIC NAME EXISTS, SUCH AS FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (AS MODIFIED); CONNECTOR (AS MODIFIED). EXCLUDES TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; AND CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. FOR ITEMS HAVING PRINTED ELECTRICAL CONDUCTOR PATHS, SEE PRINTED WIRING BOARD.
CAGE Information
| Code | Company |
|---|---|
| 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION |
Federal Supply Class
Title
LUGS, TERMINALS, AND TERMINAL ST
Inclusions:
INCLUDES BINDING POSTS; BATTERY CLIPS; STUD TERMINALS; TEST CLIPS.
Exclusions:
EXCLUDES CAPS, ELECTRICAL; CLIPS, ELECTRICAL; AND CONTACTS, ELECTRICAL.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSCS | NONFEEDTHRU TERMINAL QUANTITY | 18 SINGLE |
| AAPB | DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 2.2 |
| AAQW | MOUNTING SLOT LENGTH | 0.281 INCHES |
| AMPS | CURRENT RATING IN AMPS | 30.0 |
| ABDU | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 4.125 INCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B728,CLASS B FED SPEC SINGLE MATERIAL RESPONSE TERMINALS |
| ABGN | BOARD OVERALL LENGTH | 4.625 INCHES |
| ABCS | TERMINAL ROW QUANTITY | 2 |
| AAQX | MOUNTING SLOT WIDTH | 0.219 INCHES |
| CWLG | TERMINAL PATTERN ARRANGEMENT | MULTI-ROW |
| ABGP | BOARD OVERALL WIDTH | 1.312 INCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14,TYPE MAI-60 MIL SPEC SINGLE MATERIAL RESPONSE BOARD |
| ABDX | DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.250 INCHES |
| ABGS | BASE THICKNESS | 0.375 INCHES |
| CWLN | TERMINAL DESIGN | NONFEEDTHRU |
| ABCT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.375 INCHES |
| ABDW | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.656 INCHES |
| MATT | MATERIAL | COPPER ALLOY 670 TERMINALS |
| ABCX | BOARD CONSTRUCTION | HOLLOW CONSTRUCTION WITHOUT INSULATED STRIP |
| MARK | SPECIAL MARKINGS | 1 THRU 18 |
| CRNL | NONFEEDTHRU TERMINAL TYPE | 600 SINGLE |
| ABGR | BOARD HEIGHT EXCLUDING TERMINALS | 0.688 INCHES |
| MATT | MATERIAL | PLASTIC POLYESTER BOARD AND GLASS FIBER BOARD |
| ABCU | DISTANCE BETWEEN TERMINAL ROW CENTERS | 0.688 INCHES |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 2 SLOT |
| ABGQ | BOARD OVERALL HEIGHT | 0.688 INCHES |
| AAQL | BODY STYLE | BARRIER TYPE |