Part Number
Part Number:
NSN:
NIIN:
Item Name:
GENERATOR , ENGINE ACCESSORY
Definition:
A GENERATOR PRIMARILY DESIGNED TO BE MOUNTED ON AN INTERNAL COMBUSTION ENGINE, AND TO BE DRIVEN BY THE ENGINE TO KEEP THE BATTERY IN A CHARGED CONDITION. MAY ALSO SUPPLY CURRENT FOR THE ENGINE IGNITION SYSTEM AND/OR ELECTRICAL EQUIPMENT WHICH IS CONNECTED TO THE BATTERY CIRCUIT. INCLUDES ALTERNATING CURRENT GENERATORS DESIGNED FOR USE WITH A RECTIFIER. EXCLUDES THE MAJOR GENERATOR OF "GENERATING SETS". FOR GENERATORS SPECIFICALLY DESIGNED FOR AIRCRAFT USE AND NOT MOUNTED ON THE ENGINE, SEE GENERATOR, DIRECT CURRENT.
CAGE Information
| Code | Company |
|---|---|
| 24975 | PRESTOLITE ELECTRIC INCORPORATED |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BZRR | THREAD SERIES | UNF |
| ELEC | VOLTAGE IN VOLTS | 28.0 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.453 INCHES NOMINAL |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.243 INCHES MINIMUM AND 7.256 INCHES MAXIMUM |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 4.187 INCHES NOMINAL |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| AFYS | KEYWAY LENGTH | 0.625 INCHES NOMINAL |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 159.0 |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | 1.406 INCHES NOMINAL |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 4.187 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 8.119 INCHES MINIMUM AND 8.132 INCHES MAXIMUM |
| AHZV | SUBMERSIBILITY | SUBMERSIBLE |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 10000 |
| ABVA | UNTHREADED PORTION LENGTH | 1.312 INCHES NOMINAL |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| BCGM | RECTIFIER LOCATION | INTEGRAL |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| AASA | THREAD LENGTH | 0.750 INCHES NOMINAL |
| AWDP | THREAD DIAMETER | 0.625 INCHES NOMINAL |
| CFHL | THREAD CLASS | 2A |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| ADER | MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| ABPT | SECOND STEP DIAMETER | 0.6684 INCHES MINIMUM AND 0.6990 INCHES MAXIMUM |
| ABRR | KEYWAY WIDTH | 0.125 INCHES NOMINAL |
| BCGN | GROUNDING METHOD | INTERNAL |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 2000 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 60.0 |
| AXHX | GROUND POLARITY TYPE | NEGATIVE |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 0.375 INCHES NOMINAL |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 180.0 |