Part Number
Definition:
A GENERATOR PRIMARILY DESIGNED TO BE MOUNTED ON AN INTERNAL COMBUSTION ENGINE, AND TO BE DRIVEN BY THE ENGINE TO KEEP THE BATTERY IN A CHARGED CONDITION. MAY ALSO SUPPLY CURRENT FOR THE ENGINE IGNITION SYSTEM AND/OR ELECTRICAL EQUIPMENT WHICH IS CONNECTED TO THE BATTERY CIRCUIT. INCLUDES ALTERNATING CURRENT GENERATORS DESIGNED FOR USE WITH A RECTIFIER. EXCLUDES THE MAJOR GENERATOR OF "GENERATING SETS". FOR GENERATORS SPECIFICALLY DESIGNED FOR AIRCRAFT USE AND NOT MOUNTED ON THE ENGINE, SEE GENERATOR, DIRECT CURRENT.
CAGE Information
| Code | Company |
|---|---|
| 24975 | PRESTOLITE ELECTRIC INCORPORATED |
Federal Supply Class
Title
ENGINE ELECTRICAL SYSTEM COMPONE
Inclusions:
INCLUDES GENERATORS; MAGNETOS; SPARK PLUGS; IGNITION COILS; IGNITION DISTRIBUTORS; ENGINE VOLTAGE REGULATORS; IGNITION HARNESS ASSEMBLIES; STARTING MOTORS FOR ENGINES.
Exclusions:
EXCLUDES VEHICULAR LIGHTING FIXTURES (FSC 6220) AND AIRCRAFT GENERATORS (FSC 2925).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | 0.406 INCHES NOMINAL |
| ADER | MOUNTING STYLE | ROUND FLANGE WITH HOLES EQUALLY SPACED |
| AAUK | SPLINE WIDTH | 0.080 INCHES NOMINAL |
| ELEC | VOLTAGE IN VOLTS | 28.0 |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | ANY ACCEPTABLE |
| AXFH | SPLINE LENGTH | 1.063 INCHES NOMINAL |
| ABTJ | MOUNTING HOLE QUANTITY | 6 |
| BCGS | SHAFT DRIVE END STYLE | SPLINED SHAFT END |
| ABFF | FURNISHED ITEMS | COOLING FAN |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 8000 |
| ABSA | SPLINE QUANTITY | 16 |
| AHZV | SUBMERSIBILITY | SUBMERSIBLE |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | NOT RATED |
| AAUH | SPLINE MINOR DIAMETER | 0.727 INCHES NOMINAL |
| AAUJ | SPLINE MAJOR DIAMETER | 0.867 INCHES NOMINAL |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 100.0 |
| BCGM | RECTIFIER LOCATION | SEPARATE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 2000 |
| ABUH | MOUNTING HOLE CIRCLE RADIUS | 4.995 INCHES MINIMUM AND 5.005 INCHES MAXIMUM |