Part Number
Definition:
A GENERATOR PRIMARILY DESIGNED TO BE MOUNTED ON AN INTERNAL COMBUSTION ENGINE, AND TO BE DRIVEN BY THE ENGINE TO KEEP THE BATTERY IN A CHARGED CONDITION. MAY ALSO SUPPLY CURRENT FOR THE ENGINE IGNITION SYSTEM AND/OR ELECTRICAL EQUIPMENT WHICH IS CONNECTED TO THE BATTERY CIRCUIT. INCLUDES ALTERNATING CURRENT GENERATORS DESIGNED FOR USE WITH A RECTIFIER. EXCLUDES THE MAJOR GENERATOR OF "GENERATING SETS". FOR GENERATORS SPECIFICALLY DESIGNED FOR AIRCRAFT USE AND NOT MOUNTED ON THE ENGINE, SEE GENERATOR, DIRECT CURRENT.
CAGE Information
| Code | Company |
|---|---|
| 35510 | PRESTOLITE ELECTRIC INC |
Federal Supply Class
Title
ENGINE ELECTRICAL SYSTEM COMPONE
Inclusions:
INCLUDES GENERATORS; MAGNETOS; SPARK PLUGS; IGNITION COILS; IGNITION DISTRIBUTORS; ENGINE VOLTAGE REGULATORS; IGNITION HARNESS ASSEMBLIES; STARTING MOTORS FOR ENGINES.
Exclusions:
EXCLUDES VEHICULAR LIGHTING FIXTURES (FSC 6220) AND AIRCRAFT GENERATORS (FSC 2925).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BZRR | THREAD SERIES | UNF |
| BZRR | THREAD SERIES | UNF |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | 1.344 INCHES NOMINAL |
| ELEC | VOLTAGE IN VOLTS | 28.0 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 180.0 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.453 INCHES NOMINAL |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.243 INCHES MINIMUM AND 7.256 INCHES MAXIMUM |
| AFYS | KEYWAY LENGTH | 0.562 INCHES NOMINAL |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 2700 |
| TEST | TEST DATA DOCUMENT | 19207-11640180 DRAWING |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 4.125 INCHES NOMINAL |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 7.681 INCHES MINIMUM AND 7.694 INCHES MAXIMUM |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 8000 |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 159.0 |
| ABVA | UNTHREADED PORTION LENGTH | 1.219 INCHES MINIMUM AND 1.281 INCHES MAXIMUM |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| ABRR | KEYWAY WIDTH | 0.250 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABPT | SECOND STEP DIAMETER | 0.874 INCHES NOMINAL |
| AWDP | THREAD DIAMETER | 0.750 INCHES NOMINAL |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| AASA | THREAD LENGTH | 0.750 INCHES NOMINAL |
| BCGM | RECTIFIER LOCATION | SEPARATE |
| CFHL | THREAD CLASS | 2A |
| ADER | MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 4.125 INCHES NOMINAL |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 0.375 INCHES NOMINAL |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 180.0 |