Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OF MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 02297 | ACE ELECTRONICS ASSOCIATES INC |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 7TH SECONDARY QUALITY |
| AAPN | SECTION QUANTITY | 1 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.000 INCHES NOMINAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| AFJN | FRAGILITY FACTOR | MODERATELY DELICATE |
| ABTB | MOUNTING HOLE DIAMETER | 0.093 NOMINAL INCHES |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| ADAT | BODY WIDTH | 0.190 INCHES NOMINAL |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 6120.0 MINIMUM AND 9720.0 MAXIMUM |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0/+50.0 SINGLE SECTION |
| ADAU | BODY HEIGHT | 0.315 INCHES NOMINAL |
| TEST | TEST DATA DOCUMENT | 81349-MIL-R-39015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| ABWV | SHAFT DIAMETER | 0.115 INCHES NOMINAL |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.100 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | REAR END |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.058 INCHES NOMINAL |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 SINGLE SECTION |
| ADAQ | BODY LENGTH | 1.250 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-R-39015/1 GOVERNMENT SPECIFICATION |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |