Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FINCTIONAL TOLERANCE (LINEARITY) OF THE OUTPUT IS EQUAL TO OR LESS THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSTIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE REHOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 04454 | SENSOR SYSTEMS L.L.C. |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 5000.0 SINGLE SECTION |
| AJYN | SCREW THREAD DIAMETER | 0.138 INCHES NOMINAL |
| AAPN | SECTION QUANTITY | 1 |
| AEDX | SHAFT STYLE | ROUND |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 TURRET |
| ABPM | BODY DIAMETER | 0.875 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| AEDZ | SHAFT BEARING TYPE | BALL |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 340.0 NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| ABWV | SHAFT DIAMETER | 0.1249 INCHES NOMINAL |
| AEFL | MAXIMUM RUNNING TORQUE | 0.30 INCH-OUNCES |
| AEGC | SHAFT RADIAL PLAY | 0.002 INCHES |
| AEFK | MAXIMUM STARTING TORQUE | 0.30 INCH-OUNCES |
| ABPA | UNDERCUT DIAMETER | 0.781 INCHES MAXIMUM |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| ADAQ | BODY LENGTH | 0.570 INCHES MAXIMUM |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AECZ | MOUNTING LIP DIAMETER | 0.8750 INCHES NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.15/+0.15 SINGLE SECTION |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.7 FREE AIR SINGLE SECTION |
| AAVL | PILOT DIAMETER | 0.7500 INCHES MAXIMUM |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.250 INCHES MAXIMUM |
| APXH | TERMINAL LOCATION | REAR END |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -400.0/+400.0 SINGLE SECTION |
| AEFY | SHAFT END PLAY | 0.003 INCHES |
| ADAV | OVERALL DIAMETER | 0.875 INCHES NOMINAL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AXGY | MOUNTING METHOD | THREADED HOLE |
| ABHP | OVERALL LENGTH | 1.151 INCHES MAXIMUM |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| AEGA | LATERAL RUNOUT | 0.002 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.0045 INCHES |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -1.0/+1.0 OHMS SINGLE SECTION |
| ABXF | SHAFT LENGTH | 0.410 INCHES NOMINAL |