Part Number
Definition:
A MECHANICAL DEVICE DESIGNED TO CONVERT THE ENERGY OF FLUID PRESSURE TO ROTARY MOTION.
CAGE Information
| Code | Company |
|---|---|
| 77272 | THE BOEING COMPANY DBA BOEING |
Federal Supply Class
Title
AIRCRAFT HYDRAULIC, VACUUM, AND
Inclusions:
INCLUDES HYDRAULIC AND PNEUMATIC ACCUMULATORS, PUMPS, MOTORS, ACTUATING CYLINDERS, AND FILTERS; DE-ICING BOOTS; FLUID TYPE DE-ICING PUMPS, VALVES AND FILTERS; VACUUM SYSTEM OIL SEPARATORS; PNEUMATIC PRESSURIZATION EQUIPMENT OTHER THAN THAT FOR PRESSURIZING CABINS AND COMPARTMENTS.
Exclusions:
EXCLUDES JET ENGINE HYDRAULIC COMPONENTS (FSC 2840); VALVES SPECIFICALLY DESIGNED FOR AIR CONDITIONING, HEATING, VENTILATING, CABIN PRESSURIZING, AND THERMAL DE-ICING (FSC 1660); VALVES SPECIFICALLY DESIGNED FOR USE WITH AIRCRAFT ENGINES (FSC 2840); GUIDED MISSILES AND GUIDED MISSILE ENGINES (FSC 1338), LANDING GEAR (FSC 1620), WHEEL AND BRAKE SYSTEM COMPONENTS (FSC 1630); OXYGEN BREATHING SYSTEM COMPONENTS (FSC 1660); IN-FLIGHT REFUELING SYSTEM HYDRAULIC COMPONENTS (FSC 1680); SPECIFICALLY DESIGNED HYDRAULIC POWER STEERING SYSTEM COMPONENTS (FSC 1620).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ASAP | SPLINE PITCH | 20/40 |
| AXFQ | CONSTANT DISPLACEMENT PER REVOLUTION | 0.408 CUBIC INCHES |
| AXFP | DISPLACEMENT TYPE | CONSTANT |
| ABTJ | MOUNTING HOLE QUANTITY | 4 |
| AZFG | MOUNTING BOLT HOLE SPACING | 3.536 IN. BY 3.536 IN. |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| AKCT | SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| AXFC | CONNECTION DESIGN | THREADED |
| AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 10000.0 |
| AAUJ | SPLINE MAJOR DIAMETER | 0.600 INCHES MINIMUM AND 0.610 INCHES MAXIMUM |
| AAUH | SPLINE MINOR DIAMETER | 0.505 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AAPL | TORQUE LOAD RATING | 3000.0 INCH-POUNDS |
| AJAB | DRIVE SHAFT TYPE | SPLINED, INVOLUTE INTERNAL |
| AXFB | MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3150PSI AT 160 DEG F |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY THE SOURCE CONTROL DWG NO. |
| AGJS | PITCH DIAMETER | 0.550 INCHES NOMINAL |
| AAXX | MOUNTING TYPE | FLANGE |
| ABSA | SPLINE QUANTITY | 11 |