Part Number
Part Number:
NSN:
NIIN:
Item Name:
WASHER , RECESSED
Definition:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
CAGE Information
Code | Company |
---|---|
00000 | ORDNANCE CORPS |
Characteristics (Decoded)
MRC | Requirements Statement | Clear Text Reply |
---|---|---|
ABKW | OVERALL HEIGHT | 0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
ABKW | OVERALL HEIGHT | 0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
CSTM | RECESS ANGLE | 90.000 DEGREES NOMINAL |
MATT | MATERIAL | STEEL COMP 1010 OVERALL AND STEEL COMP 1025 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
ABKV | OUTSIDE DIAMETER | 3.170 INCHES MINIMUM AND 3.175 INCHES MAXIMUM |
ABMH | RECESS DEPTH | 0.062 INCHES NOMINAL |
AAUB | HOLE DIAMETER | 1.629 INCHES MINIMUM AND 1.633 INCHES MAXIMUM |
STYL | STYLE DESIGNATOR | RECESS |
ABMD | RECESS DIAMETER | 1.754 INCHES MINIMUM AND 1.758 INCHES MAXIMUM |