Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 93343 | WHITE FARM EQUIPMENT CO SUB OF TIC I |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 0.9960 INCHES NOMINAL |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 0.9960 INCHES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 0.9960 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 7 |
| BDSQ | FIRST END SPLINE QUANTITY | 6 |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 0.7950 INCHES NOMINAL |
| AMDM | FIRST END SPLINE LENGTH | 1.500 INCHES NOMINAL |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 0.7920 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.9960 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.9960 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | SPLINED (STRAIGHT) |
| MATT | MATERIAL | STEEL |
| BDSR | SECOND END SPLINE QUANTITY | 6 |
| CSPY | LARGEST STEP DIAMETER | 1.375 INCHES NOMINAL |
| AAHP | SECOND END STYLE | SPLINED (STRAIGHT) |
| ABHP | OVERALL LENGTH | 29.344 INCHES NOMINAL |